Panasonic Windea VGDT18143W Simple Manual page 34

5
Touch when the audio
recording ends
● The Message screen appears, and
the date and time of the audio
recording appear.
● If you want to check the audio
recording details, touch
touching .
● If you want to redo the audio
recording, touch first before
recording the audio again.
6
Press the OFF button to end
●
The screen turns off and the area around
the MENU button flashes in blue.
●
If the call sub-base unit with monitor is
connected, the area around the MENU
button of the call sub-base unit with
monitor will also flash in blue.
The screen will automatically turn off when no
Note
operation is performed for 30 seconds.
The area around the MENU button can
Installer
Setting also be set not to flash in blue (new
arrival indication).
Consult with the management company
or the company that installed the system.
62
before Touch
終了
OFF
Press
Playing Back a Message
Note To check a message when the light in the area around the MENU button goes off, perform
the operation in pages 61 to 62, and touch
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
● The Notice screen appears.
2
Touch
●
The message is played back.
● If you touch in the play screen,
Delete
the message is deleted and the display
returns to the Notice screen.
3
When playback ends, touch either
or
●
When you touch , will
disappear from the Notice screen.
When you return to the waiting state, the
light in the area around the MENU
button will go off.
● When you touch , will
remain in the Notice screen.
When you return to the waiting state, the
area around the MENU button will
continue to flash in blue.
4
Press the OFF button to end
● It will return to the waiting state (nothing is displayed on the screen).
Note
The screen will automatically turn off when no operation is performed for 30 seconds.
About Messages
(For base unit)
5
in Step .
復旧/警報音停止
RESET/ STOP ALARM
MENU button
flashes in blue
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
● For base unit
Touch
Touch
63