Calling The Unit Entrance - Panasonic Windea VGDT18143W Simple Manual

3
Press the TALK Button Again
● A call can be made to a new call destination.
●
A base unit or sub-base unit which did not
answer will return to the waiting state.
For Call Sub-base Unit
1
Ringtone of the caller sounds
No ringtone will sound from a base unit or another
Note
sub-base unit which is not being called.
(Screen will also not appear.)
2
Tell the current caller to end
the call
3
Press the TALK button again
● The current conversation ends.
4
Press the TALK button again
● Calls can be made to a new call destination.
40
Receiving a Call While Talking
通話
TALK
Press
VGD13113W VGD13113W
非常
EMERG.
ロビー ロビー
警報 警報 管理 管理
ALARM ALARM MANAGER MANAGER LOBBY LOBBY
室内呼 解錠
UNLOCK
EXTENSION
呼出音量
VOLUME TALK button
通話
TALK
Press

Calling the Unit Entrance

For Base Unit/ Call Sub-base Unit with Monitor
1
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
● When you want to monitor the scene around the unit
Note
entrance, see page 64.
● If you press the TALK button instead of the MENU
button, you can start operating from Step
2
2
Touch
●
The Calling screen appears.
3
Touch
●
Calls with the unit entrance will be enabled
on the spot. Call tone does not sound.
● Depending on the equipment and operating
Note
configuration of the condominium you are living
in, the call destination description differs.
●
For a call sub-base unit with monitor, "Other
Unit", "Message" will not appear.
4
Talk
● The conversation will end automatically in
approximately 1 minute from the start of
the call.
● The conversation time can be extended.
( Page 33)
Note If a door phone with no camera is installed,
the screen turns blue.
5
Press the TALK button to end
● The conversation with unit entrance ends.
復旧/警報音停止
RESET/ STOP ALARM
MENU
button
電源 Press
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
3
.
● For base unit
Touch
Touch
通話
TALK
Press
41