If An Incoming Call Is Received During An Alarm; Performing Other Operations During Alarms - Panasonic Windea VGDT18143W Simple Manual

If an Incoming Call is Received During an Alarm

If you receive a call from the main entrance or building manager room, the caller appears in
the sub-screen, and the alarm message and ringtone are played alternately.
●
Note Only the ringtone sounds when alarms with a priority of
Note
●
Calls from the unit entrance cannot be taken when alarms are active. (Take the call by using the STOP
ALARM button to stop the alarm.)
● The call ringtone is not triggered from the main entrance and building manager room during earthquake
alarm (prediction) messages. Calls cannot be taken from the main entrance or building manager room
(with video capability) while a fire or gas alarm is active.
Example) A call is received from the main entrance while an emergency alarm is active:
Note does not appear in
the call sub-base unit with
monitor.
The device number does not
appear on the sub-screen.
The alarm must be turned off before taking the call.
1
Press the STOP ALARM button
●
This action stops any active alarms.
The ringtone continues to sound.
●
The screen changes to the caller screen,
and the alarm display appears in the sub-screen.
●
Note The screen appears in blue when receiving a call
from the building manager room (without video capability).
● Calls cannot be taken from the call sub-base
unit if the STOP ALARM button is not pressed
on the base unit or call sub-base unit with monitor.
2
Press the TALK button to start
a conversation
( Page 22)
3
Press the TALK button to end
the conversation
●
This action displays the alarm screen.
If the TALK button is pressed without
pressing the STOP ALARM button to
stop an alarm:
● One of the screens on the right appears.
Touch to return to Step 1
perform the necessary operations.
The same screen appears whether
Note
or is touched on the alarm screen.
184
9 12
through are active ( Page 182).
STOP ALARM button
復旧/警報音停止
RESET/ STOP ALARM
Sub-screen
Alarm screen
電源
POWER
TALK button
● For base unit
and
● For base unit ● For call sub-base unit
with monitor

Performing Other Operations During Alarms

(For base unit)
The system can be operated from the Top Menu screen by shutting off any sounding alarms.
1
Press the STOP ALARM button
●
This action stops any active alarms.
2
Touch
●
The Top Menu screen appears. Select
a menu option to operate the system.
●
When appears in the Alarm
screen, touching closes the
screen and causes the area around the
MENU button to light up in red. Press
the MENU button again to display the
Top Menu screen.
● To display the Alarm screen again
Touch on the Top Menu screen
to display the Notice screen. Touch
to display the
Alarm screen.
復旧/警報音停止
RESET/ STOP ALARM
1
Press
2
Touch
電源
POWER
● While an emergency alarm has been triggered
Touch
185