Notice Regarding Software - Panasonic Windea VGDT18143W Simple Manual

Earthquake Early
Warning System
"(Beep) The earthquake alarm from a moment ago was an error. Please be at ease."
(false alarm)
Earthquake Early
"(Beep) We are now beginning an earthquake alarm test. (Siren) Warning! A strong
Warning System (test)
earthquake is about to come. (Beep) The earthquake alarm test is now over."
Simplified earthquake
intensity display
"(Beep) We are now beginning an earthquake alarm test.
(Siren) Earthquake coming. Intensity 6-lower.
(Siren) Earthquake coming in 20 seconds. Intensity 6-lower, (siren).
Earthquake Early (Siren) Earthquake coming in 10 seconds. Intensity 6-lower.
Warning System
(Siren) Earthquake very soon. Intensity 6-lower." x 1 time, then
(test notice)
"We have an earthquake. Please use caution." x 2 times, then
Detailed earthquake
"(Beep) The earthquake alarm test is now over."
intensity display
Above is for when the test is started from 30 seconds before.
The test pattern differs depending on the setting of the Earthquake Early Warning
System interface panel.
Elevator stop "(Beep)" x 1 time, then "The elevator has stopped because of an earthquake." x 2 times
Elevator restore "(Beep)" x 1 time, then "The elevator is working again." x 2 times
Delivery notification "(Beep)"
Return home notification "(Beep)"
The size of bubble in the energy saving monitor (bubble display)
The size of the bubble changes in 4 levels as follows depending on the momentary value of electricity.
Electricity momentary value = 0.0 kW
Electricity momentary value <
Standard value * x 0.3
Standard value * x 0.3 ≦ Electricity momentary
value < Standard value * x 0.7
Standard value * x 0.7 ≦ Electricity momentary
value
*"Standard value" is the maximum electricity momentary value measured in the past.
(Initial value is 2.0 kW, maximum value is 100.0 kW (2.0 kW steps).)
The recorded standard value will be lost and returns to the initial value when the power supply of
the base unit (AC100 V, AC24 V) is turned OFF.
228

Notice Regarding Software

Specifications
License
This product contains the software developed by OpenSSL Project to be used with the Open
SSL Toolkit (http://www.openssl.org/).
Confirm the information of this license at following support site. (As of September, 2016)
http://www2.panasonic.biz/es/densetsu/ha/mansion_ha/windea/license/index.html
For base unit with browser function
This product (VGDT18143W, VGDT18145W, VGDT18723W, VGDT18743W, VGDB18143W,
VGDB18145W) is equipped with the NetFront Browser by ACCESS CO., LTD.
(Only for HTML)
ACCESS, ACCESS logo, and NetFront is trademarks or registered trademarks of
ACCESS CO., LTD., in Japan, United States, and other countries. (C)2012 ACCESS CO.,LTD.
All rights reserved.
Part of the software for this product contains a module developed by Independent JPEG Group.
229