Table of Contents
Advertisement
Confirmation Method
4
: Confirmation by the Private Security Number
Following linked operation can be performed simultaneously with unlocking of the main
entrance (electronic lock) by the private security number.
●
Confirmation of delivery in delivery box
●
Confirmation of alarm state
●
Set the private security number on the base unit. (
Note
●
The control device or the integrated control panel is required to unlock with the private security
number. (Consult with the administrating company or the company that installed the system.)
1
Unlock with the private security number
1
5
(
Steps
to
in page 214)
2
The main entrance (electronic lock) is
unlocked when the authentication is
successful
●
"Unlock" appears on the LCD monitor and
unlock sound is sounded when the link setting
is set to "On" and no event has occurred.
3
Confirmation of Delivery to the Delivery Box, Message, and Alarm State
Various linked operations are performed
●
Following contents appear on the LCD monitor.
●
Confirmation of delivery in delivery box
●
Confirmation of message from the building manager room
●
Confirmation of alarm state
4
Return Home Notification
Return home notification is performed
●
It is necessary to set the "return home notification
setting" in advance to perform the return home
notification. (
Pages 110 to 111)
●
It is automatically notified to the base unit after
unlocking the main entrance (electronic lock).
(
Page 89)
●
The return home notification is cancelled when the
button (clear button) is pressed within 3
seconds after unlocking the main entrance (electronic
lock).
218
●
Confirmation of message from the building manager room
●
Return home notification to the home
Page 115)
電源
1
2
3
4
5
6
7
8
9
消
0
呼 出
(Clear button)
button
button
Numeric buttons
● Voice message is played.
5.
Elevator Link Function
The operating rules of the security operation can be temporarily cancelled by unlocking the main
entrance and ID authentication operation by the resident, and the elevator can be operated even if
the elevator is operated in security operation.
This can be operated when the condominium building HA system is linked with the elevator system. Consult
Note
with the administrating company or the building manager room if you are not sure of the installed facilities.
What is security operation?
This is a system when a suspicious person, who has entered the condominium building together
with the entrance of a visitor (tailgating), to be impossible to move around in the condominium building
by restricting the calling or specifying the destination floor of the elevator.
●
Consult with the elevator manufacturer regarding the operation of the security operation.
●
The elevator cannot be called or specifying of the destination floor (button operation) is not possible
when entered without unlocking from the base unit or the call sub-base unit while operated under the
security operation.
1
Call the visiting unit from
the lobby phone
(
Page 210)
電源
1
4
7
button
6.
Changing Language
Changes the language of screen display between Japanese and English.
Press and hold the
Note
The language will return to Japanese once the LCD screen is turned off.
2
Once the call is confirmed, unlock the
main entrance from the visiting unit
●
The elevator is moved to the lobby floor.
2
3
Numeric buttons
5
6
8
9
消
0
button
呼 出
電源
POWER
Base unit
button for 2 seconds or longer
Press and hold the
button for
2 seconds or longer
to change.
Screen unknown
Lobby Phones
Note
復旧/警報音停止
The elevator cannot be
RESET/ STOP ALARM
called or specifying of
the destination floor
(button operation) is not
possible even if the
button at the elevator hall
is pressed when entered
without unlocking from
the base unit or the call
sub-base unit.
Screen unknown
219
Advertisement
Table of Contents
