Panasonic Windea VGDT18143W Simple Manual page 75

Electricity Check Setting
The value to be the standard of power consumption state (standby electricity) can be set.
Displaying of the electricity check (light bulb icon) (
value, allowing to prevent forgetting to turn off the lighting.
●
First, turn off the electrical appliances and lamps, etc. that you do not want to turn off to
make the standard condition in the unit. Second, see the total power consumption with
the Energy Saving Monitor screen. (
1
Touch in the Energy Saving
Monitor screen
● The Setting screen appears.
● For how to display the Energy Saving
Monitor screen, see page 73.
2
Touch
● The Electricity Check Setting screen appears.
3
Select the setting method and
touch to set
Direct Input
● Sets by entering the value directly
Current Value
● Set the current power consumption as
the electricity check value
Note
If setting "Current Value" as the standby power
consumption, turn off the home appliances
such as a TV, air conditioner, lamp, etc. that
you do not want to forget to turn off in your
absence or sleeping, before touching "Current
Value".
144
pages 74 to 77) is performed based on this
Pages 74 to 77).
Touch
Touch
any one
4
Set the value
● The initial value is set to 0.1 kW.
● The range that can be set is 0.1 kW to 99.9 kW. A message "Set the electricity check setting value
in the range from 0.1 kW to 99.9 kW" screen will appear when a value out of this range is entered.
Touch
not available, and short beeps will sound to notify it.
For
Direct
Input
1
Enter the check value
2
Touch #
Touch
● Returns to the Setting screen.
●
Touch
For
Current
Value
1
Touch #
●
Returns to the Setting screen.
5
Press the OFF button when setting
is completed
● It will return to waiting state (nothing
is displayed on the screen).
Touch
● Returns to the Setting screen.
Setting the Energy Saving Monitor
and perform the setting again. The entered value exceeding the enterable digits is
Electricity Check Setting Value screen
to erase the entered value.
to set other items
(Eco Setting)
(For base unit)
1
Touch
the numeric
buttons
2
Touch
Current power
consumption
(momentary
value) is
displayed.
Touch
終了
OFF
Press
145