Table of Contents
Advertisement
If the Video Is Dark and Difficult to See
(For Unit entrance only)
Touch
Light OFF
●
Turn on the door phone with camera's
internal lighting and switch to
Light ON
the background is dark and the screen has
become too dark.
●
Touch
to turn off the lighting and
Light ON
switch to
.
Light OFF
●
This function can be performed
automatically by setting the "Extension Light
Setting: Auto" (
page 119).
The illumination range of the internal lighting is
Note
approximately 50 cm.
Any background items that are further away are
not displayed.
Zooming in (magnify) to the Video
Touch
Zoom
●
You can switch between a zoom image (2x
digital zoom) and a wide image each time
you press.
changes to
when
Zoom
Wide
using the zoom image.
●
If you touch the area that you want to zoom
in on while displaying the wide image, it will
switch to the zoom image.
●
The video is displayed as a wide image
when it is shown. (Initial state)
●
You cannot zoom in on the video from the
Note
separately installed camera.
●
The zoom image is a bit rough in comparison
to the wide image.
Moving the Zoom Image Up and Down or
Left and Right
・ ・ ・
Touch
to move the screen
●
Select the direction of movement.
●
You can move the screen by touching
the desired area.
You can also start the display with a
Installer
Setting
1.3x digital zoom setting.
Consult with the management company
or the company that installed the system.
30
when
Touch
(Wide image)
Touch
Up
(Zoom image)
Left
Down
Automatic Zoom Function
In addition to the typical zoom function when receiving a call from the main entrance (lobby
phone) or during a call, a function to recognize and zoom into the visitor's face automatically is
available. Every time the visitor moves, the camera tracks the visitor within the video field.
Installer
Setting
Lighting
The Automatic zoom function may not work properly in the following types of environments.
●
If there are plants or moving objects in the background
●
If objects resembling faces are included (posters featuring people)
●
If the face is partially or totally blocked by obstacles
●
If the surrounding illumination is extremely low or high
●
If multiple visitors appear at the same time
●
If the visitor is too close or far away
●
If the visitor is not facing forward
1
Touch
The normal
Note
2
Automatically zooms into the area
Zoom
around the visitor's face and tracks
them within the video field as they
move
●
Note
●
Adjusting the Call Volume
Right
Note
●
A blue screen appears when receiving a call from the door phone without a camera, building
manager room (without video capability), and from other unit.
●
The specified volume level is saved until it is adjusted again. (The adjusted volume is applied to both
the base unit and the call sub-base unit with monitor.) However, it is not saved during playback of
recorded video and audio (base unit only).
1
Touch
Volume
2
Touch
●
You can adjust the volume up to 3 levels
with each press. Adjust the volume while
checking the volume level.
(For base unit/call sub-base unit with monitor)
The lobby phone must be configured for this function.
(Consult with the management company or the company that installed the system.)
● Talking with the main entrance
Zoom
appears instead of
Zoom
if the visitor cannot be recognized.
Zoom
You can switch to the normal zoom
operation even during automatic tracking
by pressing the touch panel.
Automatic zoom turns off when you switch
to the wide screen. If you press the zoom
again it switches to the standard zoom
operation.
during a call until
Page 1
●Talking with the main entrance
appears on the screen
Volume
Touch
Receiving a Call
Automatic
zoom
Touch
Volume
Switch
Volume
level
Touch
31
Advertisement
Table of Contents
