Calling The Elevator; Locking/Unlocking The Unit Entrance - Panasonic Windea VGDT18143W Simple Manual

Calling the Elevator

(For base unit/call sub-base unit with monitor)
If the elevator system is linked to the condominium HA system, you can call the elevator. (If you
do not know the operating status, check with the management company, building manager
room, etc.)
Note
The call sub-base unit is not compatible with calling the elevator.
1
Press the MENU button in the
waiting state (nothing is displayed
on the screen)
● The Top Menu screen appears.
2
Touch
● The Control screen appears.
Note If the electronic lock system is linked to the
condominium HA system and installed in the
unit that you are living in, a lock mark or
unlock mark of the electronic lock will appear
in the button. ( Page 20)
3
Touch
● Calls the elevator to the floor that you are
staying in.
If it is not linked to the electronic lock system,
Note
"E.lock" will not appear.
4
Press the OFF button to end
● It will return to the waiting state
(nothing is displayed on the screen).
Note
The screen will automatically turn off when no
operation is performed for 30 seconds.
48
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
Press
● For base unit
Touch
Touch
終了
OFF
Press

Locking/Unlocking the Unit Entrance

(For base unit/call sub-base unit with monitor)
If the electronic lock system linked to the condominium HA system is installed in the unit that
you are staying in, the unit entrance can be locked and unlocked. (If you do not know the
operating status, check with the management company, building manager room, etc.)
Note
Unlocking by the call sub-base unit is available only when talking with the unit entrance.
( Page 36)
Locking the unit entrance
1
With the unit entrance unlocked
(or with the unit entrance opened)
2
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
● The Top Menu screen appears.
3
Touch
●
The Control screen appears.
4
Touch
●
The unit entrance will be locked and the
"Unlock" display on the screen will turn
to "Lock".
● The unlock indicator of the base unit or
sub-base unit will turn off.
● Unit entrance cannot be locked when the unit
Note
entrance door is open.
●
If it is not linked to the elevator system,
"Elevator" will not appear.
5
Press the OFF button to end
●
It will return to the waiting state (nothing is displayed on the screen).
Note
The screen will automatically turn off when no operation is performed for 30 seconds.
Unit entrance
Unlock
(electronic lock)
復旧/警報音停止
RESET/ STOP ALARM
MENU button
Press
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
● For base unit
Unlock indicator
lights up in red
Touch
Touch
Unlock Lock
49