Panasonic Windea VGDT18143W Simple Manual page 11

Security Intercom Model 3M Call Sub-base Unit with Monitor
Note
VGD13111W
Item number
●
This is not displayed in normal conditions.
Note
●
Installation setting on the base unit is necessary to display the Unlock indicator.
(Consult with the management company or the company that installed the system.
電源
POWER
Unlock indicator
This will light up in red when the electronic lock of
the unit entrance is unlocked, and turn off when locked.
EMERGENCY button
An alarm will sound and
flashes in red when pressed.
The alarm will stop sounding
and turn off when pressed
again.
Speaker
Adjustment of the ringtones
Note
volume setting is performed
in the user setting.
( Page 101)
LCD monitor
This is the touch panel type
LCD monitor.
Do not use generic LCD
Note
protection film.
The touch panel may not
work properly.
POWER indicator
This indicates that the power
is turned on by illuminating in
green.
UNLOCK button
The electronic lock is unlocked
when pressed while talking to main
entrance or unit entrance. It will flash
in green if unlocking is possible.
The unit entrance can be
locked, and it will flash in
green if locking is possible.
The electronic lock lock/unlock
Note
of the unit entrance can be
used when the electronic lock
system of the unit is installed
linked to the condominium HA
16
system.
(Recessed Type) (White)
Unit expansion adapter (sold separately) on the base unit is
required to use.
Call sound off indicator
This will light up in red when volume
setting is set to "Ringtones Volume
settings: Off" on the call sub-base
unit with monitor or volume setting is
set to "ringtones volume settings:
Off" on the base unit. (
STOP ALARM button
The alarm will stop
sounding when pressed.
The alarm sounding on the
base unit and the call
sub-base unit will also stop.
Fire and gas leak alarms
警報音停止
can only be stopped on
STOP ALARM
the base unit.
MENU button
Press to enter into the Top
Menu screen. The area
around the button will flash
in blue when there is
notification for a visitor or
delivery when you were not
home, and will flash in red
when there is an alarm.
電源
( Pages 58 to 60, 155)
POWER
OFF button
Press to enter the waiting
state (nothing is displayed
on the screen). This also
can end the talk.
Microphone for talking
TALK button
Product
Press to talk or to end
number
talking.
It will flash in red when
calling, and illuminate in
red when talking.
Security Intercom Model 3M Call Sub-base Unit
Item number
●
This is not displayed in normal conditions.
Note
● Installation setting on the base unit is necessary to display the Unlock indicator.
(Consult with the management company or the company that installed the system.)
Call sound off indicator
This will illuminate in red
when the VOLUME button
(described below) is set to
"Off" or when volume setting
is set to "ringtones volume
Page 101)
settings: Off" on the base
unit.
ALARM indicator
This will flash in red
when an alarm is generated.
Item number
EXTENSION button
Calls the base unit or other
call sub-base unit when
pressed.
Speaker
VOLUME button
The call volume is switched
between 3 levels (Low → Medium → High → Off)
every time it is pressed. (Setting at shipment: Medium)
● Volume cannot be adjusted on the talk volume and
Note
alarm volume.
● The call from the base unit or other call sub-base unit
will sound in "Low" even if it is set as "Off".
TALK button
Press to talk or to end talking.
It will flash when calling, and light up in red when talking.
(The color for lighting up or flashing differs depending on
the call destination or talk destination.)
● Main entrance and building manager room: Red
● Unit entrance: Yellow
● Internal call: Green
Part Names and Functions
●
Unit expansion adapter (sold separately) on the base unit is
Note
required to use.
VGD13113W
●
There is no function other than talk, alarm, and call.
MANAGER indicator
This will illuminate in red when there is a call
from the building manager room.
Unlock indicator
This will illuminate in red when the electronic
lock of the unit entrance is unlocked, and
turns off when locked.
LOBBY indicator
This will illuminate in red when there is a call
from the main entrance.
VGD13113W VGD13113W
非常
EMERG.
警報 警報 管理 管理 ロビー ロビー
MANAGER MANAGER
ALARM ALARM LOBBY LOBBY
解錠
室内呼
UNLOCK
EXTENSION
呼出音量
VOLUME
通話
TALK
(Recessed Type) (White)
Microphone for talking
EMERGENCY button
An alarm will sound and the
button will flash in red when
pressed. The alarm will stop
sounding and turn off when
pressed again.
UNLOCK button
The electronic lock is unlocked
when pressed while talking to
the main entrance or unit
entrance. It will flash in green if
unlocking is possible.
The unit entrance can be
locked, and it will flash in
green if locking is possible.
The electronic lock lock/unlock
Note
of the unit entrance can be
used when the electronic lock
system of the unit is installed
linked to the condominium HA
system.
17