Table of Contents
Advertisement
Auto Updating the Recording Screen (For Base Unit)
●
If the Not-home setting is set to "Not Home: Off" or the Living mode is set to "Home" or "Sleeping"
(Not-home recording is "Off": various modes are set to the defaults), then the oldest screens are
automatically erased and new screens are recorded when the maximum number of recordable
entries is exceeded. (Overwritten)
(Only audio can be recorded when using the base unit with the sound recording function.)
You can
screen recordings that you do not want to erase (visitor or management
Protect
information). (
Page 206)
●
A maximum of approximately 8 entries can be protected (when a microSD memory card is not inserted)
or up to approximately 500 entries (when a 4GB or larger microSD memory card is inserted) .
●
The message "Protection complete. No more screens can be protected" appears when the maximum
number of protected screens has been reached. In addition, the message "Remove the protection"
appears during the protection operation when the maximum number of protected screens is exceeded.
●
The image quality of the recording screen might be worse than the normal lobby phone and the door
phone with camera in receiving a call, but this is not a malfunction.
Video and audio Recording Specifications (For Base Unit)
●
By default, a microSD memory card is not included.
Note
●
Please separately purchase a microSD memory card.
Capacity
Without a microSD
memory card
(not inserted)
With a microSD
4GB or more
memory card
(inserted)
●
The number of entries is a guideline. The data size may change depending on the content of
the recorded video or audio, so the numbers are not guaranteed.
●
Only microSD memory cards from 4GB to 32GB are compatible.
We recommend using memory cards manufactured by Panasonic.
●
Only audio can be recorded for visitor information when using the base unit with sound
recording function.
*1: "Visitor Record" contents. (
Page 202)
*2: Contents recorded when monitoring the unit entrance (door phone with camera). (Only when using
the base unit with the video recording function)
*3: "Building manager room" "voice mail" contents. (
28
Oldest screen erased
New screen
(overwritten)
Add
Visitor information
*1
Monitor information
*2
Management information
(Recording video and audio)
(Recording video)
(Recording audio)
Approx. 16 entries
Approx. 8 entries
Approx. 16 entries
(Protect: approx.
(Protect: approx.
(Protect: approx.
8 entries)
4 entries)
8 entries)
Approx. 1000 entries
Approx. 500 entries
Approx. 1000 entries
(Protect: approx.
(Protect: approx.
(Protect: approx.
500 entries)
250 entries)
500 entries)
Page 202)
Adjusting the Video
You can adjust aspects of the video such as changing the screen brightness or zooming (magnifying)
the screen.
●
A blue screen appears when receiving a call from the door phone without a camera, building manager room
Note
(without video capability), and from other unit.
●
If either the base unit or call sub-base unit with monitor is operated while receiving a call, the screen
display of the base unit and the call sub-base unit with monitor will change.
●
The video cannot be adjusted while receiving a call from the building manager room (with video capability).
Touch
until
Page 1
appear on the screen
Light OFF
Installer
Light OFF
Setting
the door phone lighting are configured.
Consult with the management company
or the company that installed the system.
Adjusting the Screen Brightness
Touch
Bright
●
You can adjust the screen brightness up to 5
levels with each press. Adjust the screen
brightness while checking the brightness level.
Note
The specified brightness level is saved until it is
adjusted again.
The base unit and the call sub-base unit
with monitor apply the same brightness
adjustment.
If the Video is Difficult to See
■ For the main entrance
Touch
Adjust OFF
●
Switch to
Adjust ON
*3
see when background is bright and faces
are dark or when faces are too bright.
●
Touch
to finish correcting the video
Adjust ON
and switch to
Adjust OFF
Note
●
The video from the separately installed camera
cannot be corrected.
●
The correction level is saved until it is adjusted
again.
The base unit and the call sub-base unit with
monitor apply the same correction adjustment.
■ For the unit entrance
Touch
Adjust 1
●
You can correct the video up to 3 levels with
each press. (Adjust 1 -> Adjust 2 -> Adjust 3)
Adjust the correcting level while checking the
video.
The correction level is saved until it is adjusted
Note
again.
The base unit and the call sub-base unit with
monitor apply the same correction adjustment.
(For base unit/call sub-base unit with monitor)
Bright
/
or
/
Adjust OFF
Adjust 1
appears when the settings for
● Talking with the main entrance
Brightness
to make the video easier to
.
Receiving a Call
Switch
Touch
Brightness
level
Touch
Correct
Touch
29
Advertisement
Table of Contents
