Table of Contents
Advertisement
Mobile Device Adapter Information
3
Information of the mobile device
adapter appears
Operation
Action
mode display
Normal mode
It is operating properly.
If the operation check,
network setting, etc., after the
installation is completed, set
Setting mode
the mode change switch to
"Normal".
Refer to the manual of the
mobile device adapter.
Mobile device
Complete the registration,
registration mode
or wait for 5 minutes.
Delete All Mobile Device
●
Execute this when you move into an unit that already has the mobile device adapter installed to delete
Note
all the information since the smartphone or tablet registration information of the previous tenant may still
be registered. (It is not necessary to execute if it is installed newly.)
●
Always execute this when you move out of the unit. If this is not executed, unnecessary visitor notice
may be transferred to the smartphone or tablet of the previous tenant, or the number of smartphones or
tablets of the new tenant that can be registered may be limited. The Information that is deleted by
executing is the smartphone or tablet information registered in the mobile device adapter.
3
Touch
●
Touch
to return to the screen of
2
step
4
Press the OFF button when
operation is completed
●
It will return to the waiting state (nothing
is displayed on the screen).
122
Mobile Device Adapter Information screen
Operation mode
display
Error information
display
Error information
Action
display
Normal
It is operating properly.
Confirm if a terminal with the
IP duplication
same IP is not connected to
error
the LAN.
Check the connection state
with the router (DHCP server),
No router
or if there is any error in the
router (DHCP server).
Delete All Mobile Device screen
Touch
終了
OFF
Press
Setting According to Your Preferences
EV Setting
Note
"EV Setting" does not appear in the Setting screen if the EV charging system is not installed to the
condominium.
If the installed facilities are not clear, consult the administration company or building manager room.
1
Touch
in the Setting screen
●
The EV Setting screen appears.
●
For how to start the setting, see page 97.
2
Touch #
●
The Charging Start Alarm screen appears.
3
Select either of "On/Off" and
touch
Alarm of starting the EV
Off
charging is not notified.
On
Alarm of starting the EV
(Initial setting)
charging is notified.
4
Press the OFF button when
setting is completed
●
It will return to the waiting state (nothing
is displayed on the screen).
Touch
Touch
1
Touch
any one
2
Touch
終了
OFF
Press
123
Advertisement
Table of Contents
