Table of Contents
Advertisement
Setting the Energy Saving Monitor
(For base unit)
Performs the setting to use the energy monitor function more conveniently.
Items that can be set are as follows.
●
It is recommended to set the rate setting and the target value setting before using the energy
Note
saving monitor.
●
There may be some function described in the operation manual that cannot be used depending
on the equipment installed in your unit.
●
Operation screen differs depending on the type and setting of the equipment connected to the system.
●
Operation on base unit is not possible when the call sub-base unit is connected and operated.
●
The screen will automatically turn off when no operation is performed for 30 seconds.
Setting item
Setting content
Charge is displayed in the screen by
setting the electricity rate plan, basic
Electricity Rate
rate, unit price, rate time zone, etc.
Rate
Displays on the screen by setting
Setting
Water Rate *1
the unit price for the water rate.
Displays on the screen by setting
Gas Rate
*2
the unit price for the gas rate.
Electricity Target
The target value setting for
Value Setting
electricity usage can be set.
The target value setting for
Water Target
Target
water usage can be set.
Value Setting *1
Value
Setting
Gas Target
The target value setting for
Value Setting *2
gas usage can be set.
The standby electricity which
is the base of electrical check
Electricity Check Setting
can be set.
Factor to convert the usage
CO
Conversion
of the purchased electricity,
2
Factor Setting
water (*1), and gas (*2) to
CO
can be set.
2
The history data saved on
History Data
the base unit can be saved
Other
Output
*3
to a microSD memory card.
Setting
The measurement data up to
History Data
that point and various history
data can be initialized.
The setting of each setting item
Setting
is returned to the initial setting.
Initialization
*1: Displayed only when the pulse transmitting flow meter (water) is connected.
*2: Displayed only when the pulse transmitting gas meter is connected.
*3: Displayed only when micro SD memory card is inserted.
126
(Eco Setting)
Initial setting
Page
ChargePlan: Meter-rate lighting
Basic rate: 0 Yen
127〜133
Unit price: Not set
134〜135
Not set
Not set
136〜137
300 kWh
138〜139
25 m
140〜141
3
142〜143
20 m
3
0.1 kW
144〜145
The value set by Panasonic
based on the CO
emission
2
factor published by
146〜147
the Ministry of the
Environment in 2010
148〜149
150〜151
152〜153
Electricity Rate Setting
The contracted electrical rate plan, its basic rate, and unit price (price for 1 kWh) can be set.
Once set, the charge based on the setting is displayed in the Energy Saving Monitor screen and
the Integral Power screen. Inquire the contracted electrical company for basic rate and unit
price.
●
Basic rate can be set in a range of 0 Yen to 9999 Yen, and each unit price in a range of 0 Yen to 99 Yen.
"Short beeps" will sound when a value out of range is entered, and it is not accepted.
●
Calculate the approximate unit price in the following procedure, and enter the value.
(a) Prepare the invoice for the most recent electrical charge
(b) Subtract basic rate from the invoiced price
(c) Divide (b) with the electricity usage
●
Rate is not set at the time of shipment.
Note
●
Set as close to the rate plan of the contracted electrical company to make the difference with
the actual charge as small as possible.
●
The electrical charge unit price may change depending on the conditions such as season.
Inquire the contracted electrical company.
1
The Touch
in the Energy Saving
Monitor screen
●
The Setting screen appears.
●
For how to display the Energy Saving
Monitor screen, see page 73.
2
Touch
●
The Rate Setting screen appears.
●
The Electricity Unit Price Setting
screen appears when the pulse
transmitting flow meter (water) and
the pulse transmitting gas meter is
not connected. Proceed to the
4
operation of step
.
3
Touch
●
The Electricity Unit Price Setting screen
appears.
Continued on next page
○○○○ - ×××
Example) Electrical charge: ○○○○ Yen
Electricity Usage: △△△kWh
△△△
Basic rate:
××× Yen
Yen
Touch
Touch
Touch
127
Advertisement
Table of Contents
