Part Names and Functions
Buttons
Handset
VG-M186D
Touch Panel Operations
Operate the touch panel using your fingers.
●Do not use objects with a sharp and hard end, such as a pen or a mechanical pencil.
(Doing so may scratch the screen surface.)
●Do not apply excessive weight on the touch panel.
(The touch panel may crack.)
* If the touch panel cracks it can become a cause of injury. Do not touch the product with your bare
hands. Contact customer assistance. (Refer to page 111).
●If the touch panel stops responding well, readjust the touch positions. (Refer to page 96.)
10
Monitor Screen (Touch Panel)
●
The basic operation displays and
operation buttons appear on the
monitor screen.
Fire Confirmation Button
●
Press this button to confirm that
there is a fire after you hear the
automatic fire alarm.
Display Button
This button is pressed when new
●
information is displayed or a function
is started.
Stop Alarm Button
火災
窓
電源
FIRE
WINDOW
POWER
押す
玄関
外出
PUSH
DOOR
ABSENT
●
This button is pressed to stop the
警報音停止 画面表示
alarm sound.
非 常
STOPALRM DISPLAY
EMERG.
Emergency Button
ハンズフリー
HANDS FREE
Hands-free Microphone
Hands-free Button
Speaker
Indicators
Fire Indicator
This indicator flashes when
●
a fire is detected, and lights
continuously if the detector
becomes disconnected.
VG-M186D
Fire Confirmation Indicator
Talk Indicator
This indicator flashes
This indicator is lit
●
●
while the detector is
while talking using the
hands-free function.
being activated.
Hands Free Communications
●Wait for the other person to finish talking before you talk. (The voice may be interrupted.)
●Talk near enough to the microphone to make the Talk Indicator light while you are speaking
(50 cm or less from the microphone).
●The conversation may be interrupted if there is loud ambient noise.
Part Names and Functions
Window Security Alert Indicator
This indicator is lit during a window
●
security alert. This indicator flashes when
security sensor 1 has been activated.
Foyer Security Alert Indicator
●
This indicator is lit while the Foyer
Security Alert is active, and flashes
while security sensor 2 is active.
Power Indicator
火災
窓
電源
FIRE
WINDOW
POWER
押す
玄関
外出
PUSH
DOOR
ABSENT
●
The main power supply to the Indoor
警報音停止 画面表示
Master can be turned OFF with a special
非 常
STOPALRM DISPLAY
breaker. The power indicator turns OFF
EMERG.
when the main power supply is turned
OFF. (This breaker will not operate if the
power indicator is turned OFF.)
ハンズフリー
HANDS FREE
Away Indicator
This indicator lights when the Away
●
Mode is used, and flashes during the
foyer security alert delay time.
Display Indicator
●
This indicator flashes when there is
a message from the manager, a
video image from the lobby, or new
information. It lights when the number
of saved records reaches the maximum.
Stop Alarm Indicator
This indicator flashes while an alarm
●
sounds. It goes OFF when the Stop
Alarm Button is pressed.
11