Panasonic Windea VGDT18143W Simple Manual page 77

History Data Output
You can output the history measurement data saved in the base unit to a microSD memory card
(sold separately) and make graphs etc. by importing to a PC.
●
Note The history data that is already on the microSD memory card will be overwritten.
Save the data on a PC if it is necessary.
●
"Eco-report Creation Tool" is required to display the data on a PC. Download from
the Panasonic webpage to the PC in advance. (
1
Touch in the Energy Saving
Monitor screen
● The Setting screen appears.
● For how to display the Energy Saving
Monitor screen, see page 73.
2
Touch
● The Other Setting screen appears.
3
Touch
●
The History Data Output confirmation screen
is output.
148
Page 83)
Touch
Touch
Touch
Setting the Energy Saving Monitor
4
Touch
● A message "It is being output. Do not remove
the SD card" appears on the screen.
Note Do not remove the microSD memory card
when it is outputting.
●
Touch to return to the previous
screen.
●
The overwrite confirmation screen
appears when there is already data in
the microSD memory card. Touch
if it can be overwritten. Touch if it
cannot be overwritten, and repeat the
operation with a microSD memory card
without any data.
5
The screen in right appears
when the output is completed
●
Returns to the Other Setting screen after
a while.
6
Remove the microSD memory card
( Pages 18 and 117)
● Read the data in the microSD memory card
with a PC. (Refer to the manual of the PC).
(Eco Setting)
(For base unit)
Touch
149