Table of Contents
Advertisement
Disarming the Security System
While the Security Alarm is Not Active
(For base unit)
The security system can be disarmed from the Top Menu screen when the security alarm is not active.
●
Operation is different when using Living mode while the "Individual Security System" setting
(installation setting) is enabled.
Note
The security system cannot be disarmed by switching between the living modes when using Living mode
and the security system setting is set "On" for all modes.
1
Press the MENU button while
the security system is armed
●
The Top Menu screen appears.
2
Touch
●
The Security Setting screen appears
when the "Individual Security System"
setting is enabled.
3
Proceed to Step
.
●
Proceed to Step
4
if the "Individual
Security System" setting is not enabled.
The security system is disarmed if the
Note
"Individual Security System" setting is not
enabled and no security number has been
configured. Operations from Step
unnecessary.
3
Touch
for the security system
circuit for which you want to
disarm the security system when
the "Individual Security System"
is enabled
●
The "Enter the security number." screen
appears.
●
The security system is disarmed if no
security number has been configured.
Operations from Step
4
are unnecessary.
●
"On" appears under the security circuit
name when the security system is armed.
●
Touch
to disarm the security system
for both windows and doors.
Note
does not appear if only the Security 1
circuit is configured.
196
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
警戒
SET
POWER
Press
Security SET indicator
appears in green
Touch
電源
警戒
SET
POWER
Security SET indicator
appears in green
3
are
●
The configured security system
circuit appears.
(Up to 4 security circuits can be
configured.)
4
Enter the security number
●
The entered security number appears.
Touch
Note
entered incorrectly. All numbers will be erased.
5
Touch
●
If the entered security number is
correct, the security alarm is disarmed.
After the security disarmed message is
triggered, and the "Security has been
turned off." message appears on the
screen, the Top Menu screen appears.
The Security Setting screen appears
when the "Individual Security System" is
enabled.
●
If the entered security number is
incorrect, the system returns to the
"Enter the security number." screen. If
this happens, repeat the procedure
from Step
●
The security system rearms after 10
Note
seconds of no operation. If this happens,
repeat the procedure from Step
●
The Security SET indicator turns off when all
security system circuits are disarmed.
●
The same message that plays from the base
unit also plays from the sub-base unit and
extension speaker if connected.
●
The system can be configured not to play
the message when the security system is
Touch
any one
disarmed. A disarming sound (short beeps)
can also be enabled.
(
Security Off Sound.)
(The sound used when arming the security
system is also changed.)
if in the security number is
.
●
.
●
See page 108 for information on the
Touch the
numeric
電源
警戒
SET
POWER
buttons
Security SET
indicator appears
in green
Touch
●
The figure illustrates an
example of entering "1234".
The Top Menu screen appears.
The Security Setting screen appears
when the "Individual Security System"
setting is enabled.
197
Advertisement
Table of Contents
