When A Delivery Article Arrives In The Delivery Box - Panasonic Windea VGDT18143W Simple Manual

Unlocking the unit entrance
1
With the unit entrance locked
2
Press the MENU button in
the waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
3
Touch
● The Control screen appears.
4
Touch
● The unit entrance will be unlocked and the
"Lock" display on the screen will turn to
"Unlock".
● The Unlock indicator of the base unit or
sub-base unit will light up in red.
If it is not linked to the elevator system, "Elevator"
Note
will not appear.
5
Press the OFF button to end
●
It will return to the waiting state (nothing
is displayed on in the screen).
Note The screen will automatically turn off when no
operation is performed for 30 seconds.
50
Locking/Unlocking the Unit Entrance
(For base unit/call sub-base unit with monitor)
Unit entrance
Lock
(electronic lock)
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
●For base unit
Touch
Lock
復旧/警報音停止
RESET/ STOP ALARM
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
Unlock indicator
●For base unit
lights up in red
終了
OFF
Press

When a Delivery Article Arrives in the Delivery Box

(For base unit/call sub-base unit with monitor)
If a delivery box system linked with the condominium HA system is installed, you will be
informed of the arrival of any delivery. In addition, depending on the operating configuration of
the condominium that you are living in, the parcel may be accepted by the building manager
room, and delivery registration may also be performed by the building manager. (If you do not
know the operating status or operating configuration, check with the management company,
building manager room, etc.)
1
Delivery arrival screen appears
● If you are in the middle of a call, arrival of
a delivery will be given in the sub-screen.
● If you do not notice the delivery arrival
screen and no operation is carried out and
so on, the screen will automatically turn off
after approximately 1 minute, and the area
around the MENU button will flash in blue to
inform you of the non-confirmation.
(
Press
●
If a call sub-base unit is connected, a
"beep" sound will also be heard from the
call sub-base unit.
Installer
Setting
2
Touch
●
It will return to the waiting state (nothing is
displayed on in the screen).
●
The area around the MENU button light up
Touch
in blue.
Unlock
3
Take out the delivery article from
the delivery box, or accept it from
the manager and get him to delete
the delivery record
● The area around the MENU button turns off.
Installer
Setting
Page 58)
The area around the MENU button can
also be set not to flash or light up in
blue (new arrival indication).
Consult with the management company
or the company that installed the system.
If a fixed period of time passes without you
going to pick up the delivery article, a "beep"
sound can be sounded. In addition, the
"beep" sound can also be disabled when a
delivery article is brought in.
Consult with the management company
or the company that installed the system.
復旧/警報音停止
Delivery display
RESET/ STOP ALARM
appears in white
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN For a call sub-base
POWER
unit with monitor,
"Confirm" does not
appear.
● For base unit
Touch
51