Table of Contents
Advertisement
Energy Saving Monitor (Penguin) Screen
The screen appears as animation of illustration of penguin, and indicates the degree of energy
saving achievement by the penguin.
●
The energy saving target value setting is set per month in "Power Consumption Target Value Setting"
(
pages 138 to 139). The degree of achievement for "Yesterday" or "Today" is determined by the
per-rate basis of the target value set per month.
●
The degree of achievement of energy saving indicates the degree of achievement of actual against
the set target value.
●
The display in the screen illustration is for explanation, and it will be different from actual display.
Note
●
The value appears as "--.- kW" when data cannot be received from the D series meter box.
■ Degree of energy saving achievement for yesterday
●
Degree of energy saving achievement for "Yesterday" is indicated
by the penguins at far left.
●
●
When the target
●
When the target
is achieved
is not achieved
●
This is displayed when the Energy
Saving Monitor screen is selected
in the selection screen
(
Page 73).
●
"Selection >" is displayed when
selected from the Eco Screen
Selection screen (
Page 73).
●
"Information > Selection >" is
displayed when selected from
the selection screen and the Eco
Screen Selection screen.
■ Degree of energy saving
achievement for today
●
Degree of energy saving
0 to 10%
achievement for "today" is
indicated by the meter.
●
The needle will move to
right as the electricity,
Over 40 to 50%
water, and gas are used,
and the color of meter will
change to yellow when it
exceeds 80% of the target
value, and to red when it
Over 80 to 90%
exceeds the target value.
76
The illustration below is displayed when
energy consumption of yesterday was 0.
Over 10 to 20%
Over 20 to 30%
Over 30 to 40%
Over 50 to 60%
Over 60 to 70%
Over 70 to 80%
Over 90 to 100%
Over 100 to 110%
Over 110 to 120%
■ Degree of energy saving achievement for this month
●
Degree of energy saving achievement for "This Month" is indicated by the size of the ice and the number
of penguins on it.
Don't give up!
(115% < degree of
achievement)
●
The size of the ice and the number of penguins on ice
increases or decreases depending on the degree of
achievement. Perform the energy saving so that there
are 5 penguins on the ice.
●
Switches to the bubble display screen.
(
Page 74)
●
Returns to the previous screen.
●
Indicated the currently used electricity.
●
The "Bulb icon" turns on when the momentary value has exceeded the electricity check setting
(
pages 144 to 145) value, allowing to check if there is any electrical appliance left on before
leaving the unit.
●
Performs the detailed setting to use more conveniently. (
●
Past maximum daily electricity consumption or CO
(
Pages 81 to 82)
●
Displays the rate time zone of the electricity. (
●
The button display will change in accordance with the time zone for rate when the electricity
rate setting (
●
Displays the past usage of energy. (
Over 120%
Viewing the Energy Saving Monitor Screen
You're almost there!
Keep it up!
(105% < degree of
(95% < degree of
achievement ≦ 115%)
achievement ≦ 105%)
Very good! (Degree of achievement ≦ 85%)
Electricity check setting
value has exceeded
emission of this month can be checked.
2
Page 80)
pages 127 to 133) is late night-time electricity power or all electrification.
Night Morning and
Day
evening
All electrification
only
Pages 78 to 79)
(For base unit)
Good!
(85% < degree of
achievement ≦ 95%)
Page 126)
77
Advertisement
Table of Contents
