Additional Functions; Zooming In And Out (Wide/Zoom, Pan/ Tilt); Sound And Display Settings For Calls And Monitoring - Panasonic VL-MV75 Operating Instructions Manual

8. Additional functions

8.1 Zooming in and out (wide/
zoom, pan/tilt)
These functions are not available for the supplied
doorphone (VL-V524). You can use these functions with
optional doorphones (page 4).
When on a call or monitoring, you can display images in
wide mode or in zoom mode. During zoom mode, you
can change the zoom position (also called "pan/tilt").
To switch from wide mode to zoom mode
Press .
To switch from zoom mode to wide mode
Press .
To change the zoom position in zoom mode
® "Pan/tilt" ®
or
Note:
R See page 12 for examples of wide mode and zoom
mode.
R The zoom feature uses a digital zoom. As a result,
the image quality of zoomed images is lower than
wide display images.
R When images are recorded in zoom mode, only the
zoomed area is recorded.
R If you adjust these settings, the settings will be
cancelled the next time you display an image. To
change how doorphone images are initially displayed
on the main monitor, see page 12.
8.2 Sound and display settings for
calls and monitoring
While monitoring or on a call, you can press
display the options menu and change sound and display
settings.
To adjust the incoming call volume
® "Sound" ®
volume" ® adjust the volume.
To adjust the volume heard at the doorphone
® "Sound" ®
volume" ® select the desired setting.
To use the voice changer
at the doorphone sound deeper)
® "Sound" ®
changer" ® select the desired setting.
To turn off the operation guide
® "Guide off" ®
R While the guide is turned off, the soft keys do not
operate their respective features. Press a soft key
other than M N to display the guide again briefly.
20
® press
*1 , *2
® "Receiver
*1
® "Owner's voice
*1
(makes the voice heard
® "Voice
.
During this time, the soft keys can be operated as
normal.
To turn on the operation guide
Press a soft key other than M
® ® "Guide on" ®
To adjust the screen brightness
® "Display" ®
® select the desired setting.
To adjust backlight compensation
® "Display" ®
compensation" ® select the desired setting.
To turn the LED lights on or off
® "Display" ®
"Illumination" ® select the desired setting.
R is displayed when the LED lights are on.
*1 These settings cannot be changed during an
incoming call.
*2 The volume can also be adjusted by pressing M N on
the right side of the main monitor (see page 11).
to
N to display the guide
.
® "Brightness"
® "Backlight
®