Panasonic Windea VGDT18143W Simple Manual page 2

Receiving a Call
(For Call Sub-base Unit)
When receiving a call from the main entrance, unit entrance, or building manager room, call tone will ring.
For main entrance: TALK button (flashing in red)/LOBBY indicator (lighting up in red)
For unit entrance: TALK button (flashing in yellow),
For building manager room: TALK button (flashing in red)/ MANAGER indicator (lighting up in red)
1 Press the TALK button
A"beep" is played and then the TALK button will turn from flashing to lighting.
•
2 Talk into the microphone
The conversation will automatically end in approximately 1 minute. (When the call is from the building
•
manager room (without video capability), it will end in approximately 4 minutes.)
3 Press the TALK button to end the call
A "beep" sound is played, the TALK button turns off, and the call ends.
•
(When the call is from the main entrance, the LOBBY indicator will turn off. When the call is
from the building manager room, the MANAGER indicator will also turn off.)
If you do not press the TALK button to end the call, the room sound will be transmitted to
Note
the caller.
Unlocking the Main Entrance (illuminated UNLOCK button)
Press the UNLOCK button flashing in green
while talking with the main entrance
The main entrance is
•
unlocked and then the
conversation will
automatically end in
approximately 5 seconds.
Extension Call
(For Call Sub-base Unit)
1 Press the EXTENSION button
2
Call tone "beep" sounds
After calling, you can talk for approximately 10 seconds even without pressing the TALK button. (The TALK
•
button lights up in green.)
After approximately 10 seconds, the status changes to the waiting state of answering (the call is ended
•
once) and the TALK button goes off.
3 Talk once the call destination answers
It is enabled to talk with the base unit or sub-base unit which replied.
•
4 Press the TALK button to end
MANAGER indicator
LOBBY indicator
35
Page
管理 管理 ロビー ロビー
MANAGER MANAGER LOBBY LOBBY
UNLOCK
室内呼
button
EXTENSION
呼出音量
VOLUME
Flashes when the door can
be unlocked (illuminated
UNLOCK button)
EXTENSION
button
When the Area around the MENU Button Flashes in Blue
35
Page
• When the area around the MENU button flashes in blue, there are notifications of visitors etc. during
your absence. The Notice screen will appear by pressing the MENU button.
• The flashing will disappear after confirming all visitors' images during your absence or all
notifications.
1
Press the MENU
button
●
For base unit
When the Area around the MENU Button Flashes in Red
• When the area around the MENU button flashes
in red, an alarm is issued. The alarm screen will
Microphone
appear by pressing the MENU button.
• The flashing will disappear after finishing
resetting of the issued alarm.
非常
EMERG.
解錠
UNLOCK
通話
TALK
■ Meanings of Major Alarm Screen Displays and Measures
A fire has broken out.
Check the situation and take appropriate measures such
TALK
as initial fire extinguishing, reporting, or evacuation. The
button
alarm sound will be stopped by pressing the STOP ALARM
Fire
button of the base unit. If the item number begins with
VGDT, the alarm sound can also be stopped by resetting
156 to 159
Page
the detector and operating the residential receiver or the
45
Page
integrated control panel, etc. in the building manager
room. If the item number begins with VGDB, the sound can
also be stopped by resetting the detector.
Gas has been leaking.
Shut off the main gas valve and open the
windows and the doors to ventilate the
room. The alarm sound will be stopped
Gas
by pressing the STOP ALARM button of
the base unit or the gas has gone.
161
Page
The gas and CO Alarm has detected
incomplete combustion (carbon
monoxide).
Open the windows and the doors to ventilate the
Ventilation
room. Stop using the device that is causing the
incomplete combustion. The alarm sound will be
162
Page
stopped by pressing the STOP ALARM button or
incomplete combustion is no longer detected.
2
Touch the detail you
want to check
MENU
button
• The example for Visitor Record
●
For base unit
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
Call 1
164
Page
Emergency
171
Page
Besides these screens on this guide, security alarm
or the Earthquake Early Warning System (prediction),
etc. appear on the screen. Refer to the operation
manual (CD-ROM) to handle these warnings.
Page 58 to 60
3
Performing
Confirmation
Page 156 to 175
EMERGENCY button
STOP
ALARM button
Press the button to stop
the alarm sound, etc.
MENU button
The Call button has been pressed.
Confirm the call and take
appropriate measures. The call
sound will be stopped by pressing
the STOP ALARM button or the call
button is reset.
The EMERGENCY button or an
other emergency button has been
pressed.
Confirm the details and take
appropriate measures such as
informing neighbors. The alarm
sound will be stopped by pressing
the STOP ALARM button or the
EMERGENCY button or the other
emergency button is reset.