Panasonic Windea VGDT18143W Simple Manual page 53

Accepting Call from Other Unit/Ringtones
Note "Other Unit" does not appear unless the setting
on the control device or the integrated control
panel is performed.
(Consult with the management company or
the company that installed the system.)
3
-1 Touch for other unit
● The Other Unit screen appears.
3
-2 Select either of "Accept Calls/
Reject Calls", and touch
Accept Calls
Accepts call from other unit.
(Initial setting)
Does not accept call from other unit.
Reject Calls
It also cannot call other unit.
●
It will return to the Ringtones screen when set to
"Reject Calls".
3
-3 Select one from "Melody 1 to
Melody 12", and touch
●
The sound is played when one from
"Melody 1 to Melody 12" is touched.
Check the sound and touch
3
-4
Select either of "Ring Once/Ring
Continuously", and touch
Sets the ringtone to sound once
Ring Once
when called from other unit.
Sets the ringtone to sound
Ring
continuously when called from other
Continuously
unit.
Initial setting
Other Unit: Melody 5, Ring Once
100
For other unit
Ringtones screen
Touch
1
Touch
any one
Touch
Touch to
go to 2/2
1
Touch
any one
.
2
Touch
Touch
any one
Touch
Ringtone Volume
3
Touch either of "Off/Low/Medium/High/
Extra High/Step", and touch
Extra High, High,
Medium, Low
(Initial setting: High)
Step
Off
●
The call sub-base unit and extension speaker will not sound
Note
linked when set to "Extra High/High/Medium/Low". The call
sub-base unit can be set individually. The volume of the
extension speaker is equivalent to "High".
●
When set to "Step".
●
The ringtone will ring in steps only when the number of rings is set to
"Ring Continuously". It will ring in volume "Low" when set to "Ring Once".
●
The call sub-base unit will not sound when the ringtones volume
2
is set to "Off" on the call sub-base unit.
●
The call message (call, lock confirmation, security preliminary
alarm) is set as follows. However, the lock confirmation is set as
ring once, so it will not sound in step. It will ring in volume "Low".
When set to "Extra High", "High", "Medium", "Low"
When set to "Step"
When set to "Off"
●
The volume for the alarm cannot be adjusted.
●
The volume from the call from extension cannot be adjusted.
The volume is equivalent to "High".
●
For the volume during the talk, see page 31.
●
For the volume of the call sub-base unit, see page 17.
Ringtone Volume
3
Select one of "Off/Low/Medium/High",
and touch
High, Medium, Low
1
(Initial setting: High)
Off
●
Note The call from the base unit or other call sub-base unit will
2
sound in "Low" even if it is set as "Off".
●
The volume for the alarm cannot be adjusted.
●
For the volume during the talk, see page 31.
Received Call Time
3
Select either of "30sec./60sec.",
and touch
30sec.
(Initial setting)
60sec.
Note It will only ring once when the number of rings is set to
"Ring Once".
Setting According to Your Preferences
For base unit
Ringtone Volume Setting screen
The ringtone sounds in set volume.
The ringtone increases gradually every
phrase. (The call sub-base unit and
extension speaker will also sound linked.)
The call sound does not sound. (The call
sub-base unit and extension speaker will
not also sound.)
Sound in accordance to the volume
Sound in accordance to the step volume
Sound in volume "Low"
For call sub-base unit with monitor
The ringtone sounds in set volume.
The ringtone does not sound.
The ringtone sounds for 30 seconds.
The ringtone sounds for 60 seconds.
2
Touch
1
Touch
any one
Ringtone Volume
Setting screen
2
1 Touch
Touch
any one
Received Call Time screen
1
2
Touch
Touch
any one
101