In The Event Of A Gas Leak Or Disconnection - Panasonic Windea VGDT18143W Simple Manual

In the Event of Detector Disconnection
When detector wiring becomes disconnected,
the system reports a disconnection.
● The detector disconnected icon will turn off
after approximately 1 minute, and the area
around the MENU button will flash in red.
●
Once the detector wiring is reconnected,
the alarm stops. Also, the area around the
MENU button, FIRE indicator, and door
phone alarm display indicator turn off.
● After pressing the STOP ALARM button,
touching on the base unit will cause
the screen to return to the waiting state, and
the area around the MENU button will light
up in red. To display the detector
disconnected icon, touch on the Top
Menu screen. ( Pages 20 to 21)
●
The FIRE indicator continues to appear, the
Note
area around the MENU button continues to
light up or flash, and the alarm display
indicator continues to flash until the detector
wiring is reconnected.
● The detector disconnected icon can also be
turned off within 1 minute. ( Page 155)
How to stop the alarm sound
●
Press the STOP ALARM button.
(The alarm can also be turned off from
the building manager room.)
Procedures during alarms
● The alarm can be disabled.
Consult with the management
Installer
Setting
company or the company that
installed the system.
160
In the Event of Fire or Disconnection
(Beeps)
STOP ALARM
button
復旧/警報音停止
RESET/ STOP ALARM
Detector
MENU button
disconnected
icon appears
Confirm button
in red
電源
火災
FIRE
POWER
Call sub-base unit
FIRE
Alarm is sounding
indicator
appears
● For base unit
in red
and do not appear in the call
Note
sub-base unit with monitor

In the Event of a Gas Leak or Disconnection

Note
Confirm that system components are properly installed before using the system.
When the gas detector detects gas, the system
reports a gas leak.
● The gas icon will turn off after approximately
3 minutes, and the area around the MENU
button will flash in red.
● Once gas is no longer detected, the alarm
stops. Also, the GAS indicator, area around the
MENU button, ALARM indicator on the call
sub-base unit, and door phone alarm display
indicator turn off.
● The GAS indicator appears only on the base
Note
unit.
Door phone
● The area around the MENU button, GAS
Alarm display indicator
indicator, ALARM indicator, and alarm display
Flashes in red
indicator continue to flash until there is no more
Alarm is sounding
gas in the gas detector.
● The gas icon can also be turned off within
3 minutes. (
How to stop the alarm sound
● Press the STOP ALARM button on the base
unit. Note that the gas detector alarm will
not turn off.
Pressing the STOP ALARM button on
the call sub-base unit with monitor does
not stop the alarms on other equipment.
Procedures during alarms
● Shut off the main gas valve and open
the windows and doors to ventilate the room.
Cautions
● Exposure to moisture containing alcohol from
cooking sauces and wines, etc. may cause
the gas detector to generate false
detections.
The system can be configured to
Installer
Setting
trigger the gas leak alarm as the gas
detector activates.
Consult with the management
company or the company that
installed the system.
In the Event of a Gas Leak
電源
POWER
Page 155)
● For base unit
(Rapid beeps)
Gas leak.
電源
火災
FIRE
POWER
● For base unit
電源
POWER
● For call sub-base unit with monitor
The gas detector
detects a gas leak
復旧/警報音停止
RESET/ STOP ALARM
ガス
GAS
GAS indicator
flashes in yellow
After approx.
40 seconds
STOP ALARM
button
復旧/警報音停止
RESET/ STOP ALARM
Gas icon
flashes in yellow
Call sub-base unit
ALARM indicator
MENU
Flashes in red
button
Alarm is sounding
ガス
GAS
Door phone
GAS
Alarm display indicator
indicator
Flashes in red
flashes
Alarm is sounding
in yellow
警報音停止
STOP ALARM
Gas icon
flashes in yellow
MENU button
Appears in white
161