Compute Box; With 1.5A Wall Adapter (36W); With 5A Wall Adapter (120W) - OnRobot HEX-E QC User Manual

HARDWARE SPECIFICATION
NOTE:
The easiest way to check if a cardboard box is sufficiently tight is simply to test
it using the VG grippers.
A high vacuum percentage setting does not give a higher lifting capacity on
corrugated cardboard. In fact, a lower setting is recommended, e.g. 20%.
A low vacuum setting results in less air flow and less friction below the vacuum
cups. This means VG gripper filters and vacuum cups will last longer.

8.1.12. Compute Box

8.1.12.1. With 1.5A Wall Adapter (36W)

Supplied Wall Adapter
Input voltage (AC)
Input current
Output voltage
Output current
Compute Box Power input (24V connector)
Supply voltage
Supply current
Compute Box Power output (Device connector)
Output voltage
Output current

8.1.12.2. With 5A Wall Adapter (120W)

Supplied Wall Adapter
Input voltage (AC)
Input current
Output voltage
Output current
Compute Box Power input (24V connector)
Supply voltage
Supply current
228
Minimum Typical
100 -
- -
- 24
- 1.5
Minimum
-
-
Minimum Typical Maximum Unit
-
-
Minimum Typical
100 -
- -
- 24
- 5
Minimum
-
-
Maximum Unit
240 [V]
1 [A]
- [V]
- [A]
Typical Maximum
24 25
1.5 -
24 25
1.5 -
Maximum Unit
240 [V]
2 [A]
- [V]
- [A]
Typical Maximum
24 25
5 -
Unit
[V]
[A]
[V]
[A]
Unit
[V]
[A]