Toshiba e-STUDIO556 Service Manual page 1440

05/08 Mode Element Sub
element
08 Setting System Option FAX
Mode
08 Setting System User
Mode interface
08 Setting System General
Mode
08 Setting System Paper
Mode feeding
08 Setting System FAX
Mode
08 Setting System FAX
Mode
08 Setting System Network
Mode
08 Setting System Network
Mode
e-STUDIO557/657/757/857
Item Subitem Code Sub-
9255
9261
9264
9267
9268
9269
9271
9272
Details Default Acceptable
code value value
FOLIO/A4-R 0
judgment when width
of paper is mixed
Maximum number of 1000 5~1000
time job build
performed
User data department 0 0~1
management
Detection method of 0 0~1
13" LG for single-size
document
Inbound FAX function 1 0~1
(Forwarding by TSI)
Tab/cover sheet-FAX 0 0~1
Printing stop function
Authentication 0 0~2
method of "Scan to
Email"
Setting whether use 0 0~1
of Internet FAX is
permitted or not when
it is given an
authentication
155
RAM Contents
0-1 SYS When the value of this code is "0", the paper size is
judged by performing switchback.
When the value of this code is "1" and the paper size is
AB-series, FOLIO is judged as A4-R and switchback is
not performed. When the paper size is LT-series, the
switchback is always performed. When the value of this
code is set to "1", the scanning performance increases
at fax transmission. However, the whole image cannot
be output since FOLIO is judged as A4-R.
0: Judgment is enabled 1: Judgment is disabled
SYS Sets the maximum number of time a job build has been
performed.
5-1000: 5 to 1000 times
SYS 0: Invalid
1: Valid
When this code is set to "1" (Valid), the department
management setting (08-9120) should be "1" (Valid).
SYS 0: Disabled 1: Enabled
SYS 0: OFF (Function disabled) 1: ON (Function enabled)
SYS Sets on or off of the printing function of special sheets
such as tab or cover sheet of FAX, Email or list print.0:
Function off 1: Function on
SYS 0: Disable
1: SMTP authentication
2: LDAP authentication
SYS 0: Not permitted 1: Permitted
Proce Servic
dure e UI
1
1
1
1
1 Yes
1 Yes
1
1