Notification Function - SATO S84-ex Operator's Manual

9.6 Notification Function

This section shows the media motion when the set notification interval has been reached.
You can set the notification function in the
mode menu.
Standby
PRINTING...
Standby
After three seconds
Warning
message
NOTIFICATION FUNCTION SETTING
Print head position
(1)
(1) (2)
Notification distance
has been reached.
(1) (2) (3)
(3)
• The counter is cleared by pressing the
the warning message is shown. (Start counting from 0 again.)
• When resuming printing without pressing the
the product enters the offline mode and the counter is not
cleared. (The warning is shown again while in standby mode.)
• When the LINE button is pressed, the product enters online
or offline mode from the warning screen. The same goes for
other buttons, entering each screen.
screen of the user
(2) (3)
(3)
ENTER button while
S84-ex/S86-ex Operator Manual
9 Appendix
ENTER button,
345