Turning On The Main Power Supply; Adjusting The Head Height - MIMAKI Tx300P-1800 Operation Manual

Chapter 2 Basic Operation

Turning on the main power supply

Once preparations up to inserting the spacers have been
completed, turn on the main power supply. For more
information on how to turn on the power,(
Turning the Power ON)
Media selection (Tx300P-1800 MkII only)
The MEDIA SELECT screen appears on the display when
the main power is turned on.
Select according to the media being used for printing.

Adjusting the Head Height

Set the head gap (height from the media to the nozzle
plane of the heads).
When the carriage is to move above the platen for printing
or maintenance, it moves while keeping the head gap at
the preset value.
The upper limit of the head gap varies with media
thickness.
Available setting values: [2.0 mm to 7.0 mm] (in units of
0.1 mm)
Press
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
and press the
• Move the carriage to the platen.
Loosen the height-adjusting screw in front,
3
and press the
• Loosen the screws, rotating each by one turn of a
standard screwdriver.
2-8
P.1-14
(MENU) (twice)
to select "HEAD HEIGHT",
key.
Carriage
key.
Adjust the height-adjusting handle
4
according to the media.
• Rotate while pressing

• Look at the display and adjust to an appropriate
value.
Height-adjusting handle
Fix the carriage.
5
• Fasten the screw securely.
Press the
6
• The carriage automatically returns to the station.
Press the
7
end the setting.
.



key.
key several times to