Workflow - MIMAKI Tx300P-1800 Operation Manual

Chapter 2 Basic Operation

Workflow

1
Preparing the main unit
2
Setting a Media
3
Print adjustment
4
Printing Data
5
Media removal
2-2
Prepare the main unit before printing.
The platen on the Tx300P-1800 MkII must be
changed depending on whether cloth media or
paper media (transfer paper) is used.
Set the media to be printed into the main unit.
Adjust the main unit and media before printing.
Once preparations are complete, start printing.
Remove the printed media once printing is
complete.