Maintenance Menu At-A-Glance - MIMAKI Tx300P-1800 Operation Manual

Chapter 4 Maintenance

MAINTENANCE MENU at-a-glance

Item
For carrying out maintenance on the carriage and station periphery.
CARRIAGE OUT
( P.4-10)
NOZZLE WASH
( P.4-12)
DISWAY WASH
STATION
( P.4-13)
MAINTENANCE
CUSTODY WASH
( P.4-14)
WIPER EXCHANGE
( P.4-22)
For printing using another nozzle, if nozzle wash and so forth fail to effect recovery from nozzle missing, etc.
PRINT
NOZZLE
ENTRY
RECOVERY
RESET
( P.4-17)
CHECK
TEST PRINT
For having the various maintenance functions executed automatically. Set the execution interval for each
maintenance function.
REFRESH
AUTO MAINT.
PUMP TUBE
( P.4-20)
CLEANING
CLEANING
FILL UP INK
Supplies ink to correct nozzle clogging.
( P.4-21)
REPLACE
WasteInkTank Resets or corrects the used count for the waste ink tank.
( P.4-23)
*1. "Soft" can also be set when reactive dye ink Rc 400 or Rc 500 is used.
4-9
Set value
1 to 99 min
1 to 99 min
ON/OFF
The setting is
different depending
on your ink type.
INTERVAL
*1
TYPE NORMAL/ HARD
Meaning
Moves the carriage out, for carrying out cleaning of the cap
periphery, head, wipers, etc.
Soaks the nozzle surfaces in maintenance cleaning fluid, for
carrying out recovery from nozzle clogging or bent.
Executes washing of the suction pump tubes.
Carried out when the machine is going to be out of use for an
extended period. Washes the nozzles and tubes beforehand, to
keep the machine in fine condition.
Used when replacing the wiper. If the wiper is replaced, the
number of times the wiper was used that is managed in this
device is reset.
Used to print a pattern and to check and/or register clogged
nozzles.
Registers the faulty nozzle identified by "PRINT".
Resets a registered faulty nozzle.
Checks recoverable printable conditions.
Enables or disables the configuration of the nozzle recovery
function during a test print.
For setting the activation interval for refresh.
For setting the activation interval for the ink discharge passage
cleaning.
For setting the activation interval for the head cleaning.
Select the cleaning type for head cleaning.