Before Use - MIMAKI Tx300P-1800 Operation Manual

This chapter
describes the items required to understand before use, such as the name of each part of
the machine or the installation procedures.
Moving This Machine .................................... 1-2
Where to Install This Machine ..................... 1-2
Working Environmental Temperature ......... 1-2
Moving This Machine .................................. 1-2
Names of Parts and Functions...................... 1-3
Front side view ........................................... 1-3
Rear Side and Right Side of the Machine ... 1-4
Front side (under) view
(Tx300P-1800 MkII Only) ............................ 1-5
Operation Panel .......................................... 1-6
Media sensor ............................................... 1-8
Carriage ...................................................... 1-8
Capping station ........................................... 1-8
Pinch rollers and Grit rollers ........................ 1-8
Connecting Cables........................................ 1-9
Connecting USB2.0 Interface Cable ........... 1-9
Connecting the LAN cable .......................... 1-9

Before Use

Connecting the power cable ......................1-10
Setting Ink ................................................... 1-11
Caution in handling of ink packs ................1-13
Turning the Power ON/OFF ........................ 1-14
Turning the Power ON ...............................1-14
Turning the Power OFF .............................1-14
Media .......................................................... 1-15
Usable sizes of media ................................1-15
Switching between cloth media and paper
media (transfer paper)
(Tx300P-1800 MkII only) ...........................1-15
Caution in handling of media .....................1-15
Limited media ............................................1-16
Menu mode ................................................. 1-17
Chapter 1