Replacing The Cap Absorber - MIMAKI Tx300P-1800 Operation Manual

Chapter 4 Maintenance
• Put a cap on the waste
ink tank removed.
Replace the waste ink tank.
7
(1) Prepare a new waste ink tank (SPA-0246) or
discard waste ink from current waste ink
tank.
(2) Insert the waste ink tank by holding a handle
of the tank.
Empty waste ink
tank
• Waste ink is equivalent to waste oil of industrial
waste. Request an industrial waste disposal
company for disposal of waste ink.
Close the waste ink tank stopper.
8
Press the
9
• The ink discharging amount that is controlled by
the machine is reset and the message is
canceled.
4-24
Waste ink
tank
Cap
key.

Replacing the Cap Absorber

Cap Absorber (PN:SPA-0269) is a consumable item. If the
dirt is severe or the ink falls off from the carriage, replace
it.
Press (MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press the
2
• The carriage moves onto the platen.
Open the front cover.
3
Remove the Cap Absorber.
4
• Remove the clasps at the front (2 points) and pull
it out.
Insert a new Cap Absorber.
5
• Align the notches with the protrusions at the back
and install it.
When replacement is complete, press the
6
key.
key twice.
Carriage