About Setup Menu - MIMAKI Tx300P-1800 Operation Manual

Chapter 3 Setup

About SETUP MENU

On SETUP MENU, you can set the print conditions to match the media you usually use.
Local <Setup 1>
heigth: 4.0mm
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
 SETUP MENUs at-a-glance
Local <Setup 1> 12:00
heigth: 4.0mm
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
SETUP 1 1/3
FEED COMP. >
DROP.POScorrect >
LOGICAL SEEK HOST
Overprint HOST
DRYING TIME >
<< >>
SETUP 1 2/3
MARGIN/LEFT HOST
MARGIN/RIGHT HOST
VACUUM HOST
FEED SPEED HOST
AUTO CLEANING >
<< >>
SETUP 1 3/3
INTERVAL WIPING >
EXTERNAL HEATER OFF
MAPS4 >
RESET SETTING >
<< >>
3-2
12:00
MENU
SETUP >
MAINTENANCE >
MACHINE SETUP >
NOZZLE CHECK >
INFORMATION >
SETUP 1 1/3 SETUP 1
FEED COMP. > FEED COMP.
DROP.POScorrect > DROP.POScorrect
LOGICAL SEEK HOST LOGICAL SEEK
Overprint HOST Overprint
DRYING TIME > DRYING TIME
<< >>
SETUP 1 2/3 SETUP 1
MARGIN/LEFT HOST MARGIN/LEFT
MARGIN/RIGHT HOST MARGIN/RIGHT
VACUUM
VACUUM HOST
FEED SPEED HOST FEED SPEED
AUTO CLEANING
AUTO CLEANING >
<< >>
SETUP 1 3/3 SETUP 1
INTERVAL WIPING > INTERVAL WIPING
EXTERNAL HEATER
EXTERNAL HEATER OFF
MAPS4 > MAPS4
RESET SETTING > RESET SETTING
<< >>
: Press this to select SETUP MENU, or to switch to the
previous screen.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
SETUP
● SETUP 1 >
○ SETUP 2 >
Select "SETUP 1 to 4" or "Temporary",
○ SETUP 3 >
and then press the
○ SETUP 4 >
○ Temporary >
<< >>
1/3 SETUP 1
> FEED COMP.
> DROP.POScorrect
HOST LOGICAL SEEK
HOST Overprint
> DRYING TIME
<< >> <<
2/3 SETUP 1
HOST MARGIN/LEFT
HOST MARGIN/RIGHT
HOST VACUUM
HOST FEED SPEED
> AUTO CLEANING
<< >> <<
3/3 SETUP 1
> INTERVAL WIPING
OFF
EXTERNAL HEATER
> MAPS4
> RESET SETTING
<< >> <<
SETUP 1 1/3
FEED COMP. >
DROP.POScorrect >
LOGICAL SEEK HOST
key.
Overprint HOST
DRYING TIME >
<< >>
1/3 SETUP 1 1/3
> FEED COMP. >
> DROP.POScorrect >
HOST LOGICAL SEEK HOST
HOST Overprint HOST
> DRYING TIME >
>> << >>
2/3 SETUP 1 2/3
HOST MARGIN/LEFT HOST
HOST MARGIN/RIGHT HOST
HOST VACUUM HOST
HOST FEED SPEED HOST
> AUTO CLEANING >
>> << >>
3/3
>
OFF
>
>
>>