Setting The Pg Drop Adjust; Setting The Media Detection - MIMAKI Tx300P-1800 Operation Manual

Chapter 3 Machine setting
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.(
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
Press
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
REMAIN", and press the
Press
3
Press the
4
Press the
5
end the setting.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. (

Setting the PG Drop Adjust

Adjust the outward and return ink drop positions during
bidirectional printing.
PG Drop Adjust adjusts the ink drop positions at two
points where the head height is not the same, so that high
quality printing can be realized by automatically adjusting
the ink drop positions even if the head height changes.
Press
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
Press
3
ADJUST", and press the
Loosen the carriage height adjustment
4
screw and press the
• Loosen the screen by referring to P.2-8 "Adjusting
the Head Height" .
With the head height set as 3 mm, tighten
5
the height adjustment screw.
Press the
6
• Ink drop position adjustment patterns 1 to 5 will be
printed.
Correct the dot positions in patterns 1 to 5
7
by referring to P.3-7 "If the Positions of
Dots Shift...".
3-16
P.2-27)
(MENU) (twice)
to select "MEDIA
key.
to select ON/OFF.
key.
key several times to
P.2-28)
(MENU) (twice)
(>>) .
to select "PG DROP
key.
key.
key twice.
By referring to steps 4 to 7, change the
8
head height to 4 mm and then correct the
dot positions in patterns 1 to 5.
Press the
9
end the setting.

Setting the Media Detection

Set the following two items in media detection settings.
When setting the media, set whether to
detect the media width automatically
Setting of Media
(AUTO) or decide the print range
Detection
manually (MANUAL).
Set whether to enter the thickness of
Setting of Media
the media during media detection.
Thickness
Select auto detection (AUTO) or
manual setting (MANUAL) for the
Winding diameter
media outer diameter of both take-up
detection
unit and feeding unit.
• To perform over printing, turn the media detection
settings to "MANUAL".
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "MEDIA
3
DETECT", and press the
Press the
4
• "DETECTION TYPE" will be selected.
Press to select "AUTO/
5
MANUAL", and press the
Press to select "INPUT
6
THICKNESS", and press
Press to select ON/OFF, and
7
press the
Press to select "DIA.DETECT"
8
and press the
Press to select AUTO / MANUAL
9
and press the
Press the
10
end the setting.
• To improve image quality for printing, we
recommend selecting "ON" in step 7.
key several times to
(twice)
key.
key.
key.
.
key.
key
key
key several times to