Chapter 1 Before Use
Moving This Machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.The place of installation must have enough
space for not only this machine itself, but also for the
printing operation.
Model
Width
Tx300P-1800
3,200 mm
(126.0 in)
Tx300P-1800
MkII
500 mm or more
(19.7 in or more)
Working Environmental Temperature
Use this machine in an environment of 20 to 30C (68 to
86F) to ensure reliable printing.
Moving This Machine
Move this machine according to the following steps when
this machine needs to be moved on the same step-free
floor.
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur. Be sure to request your distributor or our
service office to move this machine.
• When moving this machine, take care that it does
not receive a significant impact.
• Be sure to lock the casters after moving of this
machine.
Remove the caster blocks.
1
1-2
Gross
Depth
Height
weight
255 kg
(562.2 lb)
965 mm
1,857 mm
(38.0 in)
(73.1 in)
260kg
(573.0 lb)
500 mm or more
(19.7 in or more)
Raise the take-up and feeding legs.
2
Move this machine as shown in the figure.
3
• For safety, be sure to operate it with 6 people or
more.
Do not push the cover to move this machine
•
since the cover may be broken.
Lower the take-up and feeding legs.
4
Reinstall the caster blocks.
5