Male Connector Absorbent For Mbis - MIMAKI Tx300P-1800 Operation Manual

Remove the spout rubber assy.
3
• Press against the top of the spout rubber assy
and pull it out vertically.
Spout rubber Assy
Attach the new spout rubber assy.
4

Male Connector Absorbent for MBIS

When replacing the 2L ink pack, you can prevent dirt from
entering the cradle by periodically (5 to 10 times)
replacing the male connector absorbent (accessory).
Be sure to wear the supplied safety glasses
•
and gloves when replacing the male con-
nector absorbent.
• When the accessories are finished, please pur-
chase from your local dealer or our sales office.
(PN:SPA-0625)
Push down the lever attached to the
1
cradle, and remove the 2L eco-case.
Remove the male connector absorbent.
2
Insert the new male connector absorbent.
3
Install the 2L eco-case.
4
Chapter 4 Maintenance
4-27
1
2
2
4
5
6