About Maintenance Menu - MIMAKI Tx300P-1800 Operation Manual

About MAINTENANCE MENU

This provides various settings for doing maintenance on the machine.
The following items can be set in Maintenance settings.
12:00
Local <Setup 1>
heigth: 4.0mm
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
 MAINTENANCE MENUs at-a-glance
Local <Setup 1> 12:00
heigth: 4.0mm
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
MAINTENANCE MAINTENANCE
>
STATION STATION
NOZZLE RECOVERY > NOZZLE RECOVERY
AUTO MAINTENANCE > AUTO MAINTENANCE
FILL UP INK > FILL UP INK
REPLACE WasteInkTank REPLACE WasteInkTank
 Screen transition when
Local <Setup 1> 12:00
heigth: 4.0mm
< page page >
width:1340mm
TEST PRINT
MENU REMOTE
CLEANING
MENU MAINTENANCE
SETUP > STATION
MAINTENANCE > NOZZLE RECOVERY
MACHINE SETUP > AUTO MAINTENANCE
NOZZLE CHECK > INK FILLING
INFORMATION > INK TANK EXCHANGE
MAINTENANCE
>
STATION
> NOZZLE RECOVERY
> AUTO MAINTENANCE
> FILL UP INK
REPLACE WasteInkTank
is pressed
TEST PRINT > TEST PRINT
CLEANING > CLEANING
STATION MAINTENANCE > STATION MAINTENANCE
: Press this to select MAINTENANCE MENU, or to switch to
the previous screen.
: Press this to use the maintenance function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
>
>
>
>
>
MAINTENANCE
>
STATION
> NOZZLE RECOVERY
> AUTO MAINTENANCE
> FILL UP INK
REPLACE WasteInkTank
> TEST PRINT
> CLEANING
> STATION MAINTENANCE
Chapter 4 Maintenance
MAINTENANCE
> >
STATION
> NOZZLE RECOVERY >
> AUTO MAINTENANCE >
> FILL UP INK >
REPLACE WasteInkTank
>
>
>
4-8
1
2
2
4
5
6