Configure The Cu360 For Usb Audio/Video Bar Mode - Avaya CU360 Manual

© 2021 Avaya Inc. All rights reserved

Configure the CU360 for USB Audio/Video Bar Mode

USB Audio/Video Bar Mode can be activated manually on CU360, once a connected computer is
detected. The CU360 can also be conf igured to keep USB Bar mode always active in the initial
Quick Setup Wizard, or by conf iguration.
To conf igure CU360 with USB Bar Mode always active f rom the Quick Setup Wizard, go to
[G
[W
And select "As USB Audio/Video Bar".
Configure USB A/V Bar mode "Always Active" in the Quick Setup
Figure 18:
To change CU360 USB Bar Mode conf iguration f rom the Settings, you can also go to
[G
[W
•
Configure USB A/V Bar mode "Always Active" from Settings
Figure 19:
Activate USB A/V Bar Mode – Manual Mode
In manual mode, once the computer is detected by the CU360, a message will be shown on the
CU360 App page, and an icon will app ear on the CU360 App top inf o-bar. The icon f or Control
Camera will also change.
Computer connected via USB 3.0 to CU360 – USB Bar Mode is Manual
Figure 20:
To activate USB Bar mode, once your computer has been detected, press the Control camera
button on the system UX (GUI or web) or the proper remote-control key (see below pictures).
Release Notes for Avaya Collaboration Unit CU360
Important
•
If you plan to use the CU360 only in USB A/V Bar Mode, without connecting any
monitor to it, it is strongly suggested to conf igure the CU360 Bar Mode as
"Always Active".
] C > Q S >
UI ONFIGURE UICK ETUP
] [A L ]B S > Q
EB DMIN OGIN ASIC ETTINGS UICK
] C > C >
UI ONFIGURE USTOMIZATION
] [A L ] A S
EB DMIN OGIN DMINISTRATOR ETTINGS
USB Bar Mode: Manual*/Always active.
o
Manual: once the computer connected to the CU360 via USB is detected, you
can activate USB Bar mode via the remote-control or the web interf ace.
o
Always Active: just connect your computer to the CU360 via USB to start
using the CU360's audio/video peripherals f rom your computer. No f urther
manual interaction or activation is required.
Important
•
While the USB Bar Mode is active (f or manual activation or persistent "always
active" conf iguration) all the other f unctionalities of the device f rom the Web and
the GUI interf ace are disabled.
o
Incoming call will be automatically rejected (Do not disturb mode) and
calendar meeting notif ications are silenced.
o
From the GUI and the Web interf ace you can only turn-of f USB A/V Bar
Mode.
o
You can still upgrade the device via PC or Avaya Management.
S >
ETUP
> S > C >
YSTEM USTOMIZATION
Beta Build Limitation 25