Configure Avaya Aura® Session Manager Release 7.1 - Avaya Aura Communication Manager 7.1 Application Notes

5. Configure Avaya Aura® Session Manager
Note – These Application Notes assume that basic System Manager and Session Manager
administration has already been performed. Consult [1] - [4] for further details.
This section provides the procedures for configuring Session Manager to process inbound and
outbound calls between Communication Manager and the Avaya SBCE. In the reference
configuration, all Session Manager provisioning is performed via System Manager.
 Define a SIP Domain.
 Define a Location for Customer Premises Equipment (CPE).
 Configure the Adaptation Modules that will be associated with the SIP Entities for
Communication Manager, the Avaya SBCE, and Messaging.
 Define SIP Entities corresponding to Session Manager, Communication Manager, the
Avaya SBCE, and Messaging.
 Define Entity Links describing the SIP trunks between Session Manager, Communication
Manager, and Messaging, as well as the SIP trunks between the Session Manager and the
Avaya SBCE.
 Define Routing Policies associated with the Communication Manager, Messaging, and the
Avaya SBCE.
 Define Dial Patterns, which govern which Routing Policy will be selected for inbound and
outbound call routing.
 Verify TLS Certificates.
Session Manager configuration is accomplished by accessing the browser-based GUI of System
Manager, using the URL https://<ip-address>/SMGR, where <ip-address> is the IP address of
System Manager. In the Log On screen (not shown), enter appropriate User ID and Password and
press the Log On button. Once logged in, Home screen is displayed. From the Home screen,
under the Elements heading in the center, select Routing.
DDT; Reviewed:
SPOC 10/18/2017
Solution & Interoperability Test Lab Application Notes
©2017 Avaya Inc. All Rights Reserved.
Release 7.1
16 of 95
CM71SM71-VzIPCC