5.2
Servomotor Selection
Use Pn08A (Motor Selection Switch) to set the motor code of the Servomotor to use. The
default setting is for a 30-W motor.
Set the motor code correctly.
If the motor code that you set does not agree with the connected motor, unexpected opera-
tion may occur or the Servomotor may be burnt.
Monitor Codes
7001h: 30 W (Servomotor model: SGMSL-A3)
7002h: 50 W (Servomotor model: SGMSL-A5)
Motor Selection Switch
Pn08A
Setting Range
7000h to FFFFh
DANGER
Setting Unit
Default Setting
–
7001h
5.2 Servomotor Selection
When Enabled
Classification
After restart
Setup
5
5-9