YASKAWA E-S Series Product Manual page 10

Ac, dc power supply input and contact commands
Table of Contents

Advertisement

 Safety Precautions That Must Always Be Observed
 General Precautions
 Read and understand this manual to ensure the safe usage of the product.
 Keep this manual in a safe, convenient place so that it can be referred to whenever necessary.
Make sure that it is delivered to the final user of the product.
 Do not remove cables or connectors while power is being supplied to the SERVOPACK.
There is a risk of electric shock, operational failure of the product, or burning.
 Always use the correct power supply specifications for the product.
There is a risk of burning, electric shock, or fire.
 Connect the ground terminal on the SERVOPACK to a ground pole with a resistance of 100 Ω or
less.
There is a risk of electric shock or fire.
 Do not attempt to disassemble, repair, or modify the product.
There is a risk of fire or failure.
The warranty is void for the product if you disassemble, repair, or modify it.
 SERVOPACKs and Servomotors may be very hot while power is ON or soon after the power is
turned OFF. Implement safety measures, such as installing covers, so that hands and parts
such as cables do not come into contact with hot components.
There is a risk of burn injury.
 For a 24-VDC power supply, use a power supply device with double insulation or reinforced
insulation.
 Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch cables.
There is a risk of failure, damage, or electric shock.
 Do not use the product in an environment that is subject to water, corrosive gases, or flamma-
ble gases, or near flammable materials.
There is a risk of electric shock or fire.
 Do not attempt to use a SERVOPACK or Servomotor that is damaged or that has missing parts.
 Install external emergency stop circuits that shut OFF the power supply and stops operation
immediately when an error occurs.
 Use a Noise Filter to minimize the effects of electromagnetic interference.
Electronic devices used near the SERVOPACK may be affected by electromagnetic interference.
 Always use a Servomotor and SERVOPACK in one of the specified combinations.
 Do not touch a SERVOPACK or Servomotor with wet hands.
There is a risk of product failure or electric shock.
x
DANGER
WARNING
CAUTION
NOTICE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgpss servopackSgmsl servomotor

Table of Contents