Connecting To The Computer Connector (Cn5) - YASKAWA E-S Series Product Manual

4.6 Connecting to the Computer Connector (CN5)

4.6

Connecting to the Computer Connector (CN5)

To use the SigmaWin+ Engineering Tool, connect the computer on which the SigmaWin+ is
installed to CN5 on the SERVOPACK.
Refer to the following manual for the operating procedures for the SigmaWin+.
AC Servo Drives Engineering Tool SigmaWin+ Online Manual Σ-S Component (Manual No.: SIEP S800001 06)
4-20