YASKAWA E-S Series Product Manual page 155

7.3 Program Table Operation
7.3.6 SigmaWin+ Procedures
3.
Click the OK Button.
This concludes the setting procedure.
 AREA1 and AREA2
Set the areas for the program steps. AREA1 and AREA2 are the tow positions that define one
area.
Select the cells to edit and enter the values directly.
Unit
Reference units -99,999,999 to 99,999,999
The relationship between the setting of AREA1 and AREA2 and the specified area are shown
below.
If AREA1 is less than or equal to AREA2, the shaded area shown below is used.
If AREA1 is greater than AREA2, the shaded areas shown below are used.
 EVENT
Specify the conditions to complete execution of the program steps.
1.
Double-click the cell to edit.
The Event Dialog Box will be displayed.
2.
Set the condition and the wait time.
7-28
Unit Setting Range
Reference units 1 to 99,999,999
Setting Range
AREA1
AREA2
Default Setting
10
Default Setting
0
AREA2
AREA1