Cpos (Sdh/Sonet) Interface Module; Mim-1Cpos(E)/Mim-1Cpos(T) - H3C MSR Router Comware 5 Series Manual

Table 88 LED description
LED
LINK/ACT
LP/AL
Transceiver modules, optical fibers, and connection methods
For more information about transceiver modules, optical fibers, and the connection methods, see
"Fiber port."

CPOS (SDH/SONET) interface module

•
MIM-1CPOS

MIM-1CPOS(E)/MIM-1CPOS(T)

Introduction
The MIM-1CPOS is short for the 1-port channelized SDH/SONET interface module. C stands for
channelized,
STM-1/OC3-compliant multi-channel interface and support communication speeds up to 155.52
Mbps.
MIM-1CPOS has two models: MIM-1CPOS(E) for E1 system and MIM-1CPOS(T) for T1 system.
MIM-1CPOS is inserted in a MIM slot of a modular router and communicates with the CPU through
the PCI interface to receive and transmit data on STM-1 channelized POS interface. It supports:
•
Various types of transceiver modules.
•
Clear channel (unframed) E1 or T1
•
Fractional (framed) E1 or T1
•
Up to 256 64 kbps logical channels
Interface specifications
Table 89 Interface specifications
Item
Connector
Number of Connectors
Description
•
On: Carrier signal has been received.
•
Flashing: Data is being received or/and transmitted.
•
Off: No carrier signal has been received.
•
On: The interface is in a loopback.
•
Off: No loopback or alarm is present.
•
Flashing: An alarm indication signal (AIS), loss of frame alignment (LFA) signal,
or remote alarm indication (RAI) signal is present.
and POS for Packet
MIM-1CPOS(E)/MIM-1CPOS(T)
SFP/LC
1
over SDH/SONET.
64
MIM-1CPOS provides one