Ethernet Interface Module; Sic-1Fea - H3C MSR Router Comware 5 Series Manual

The SIC-4FSWP and DSIC-9FSWP interface modules each also provide a PoE LED to indicate the
PoE status.
Interface cables and the connection methods
For more information about Ethernet interface cables and the connection methods, see
interface."

Ethernet interface module

•

SIC-1FEA

•
SIC-1FEF
•
SIC-1GEC-V2
•
SIC-1GEC-H3
SIC-1FEA
Introduction
The 1-port 10Base-T/100Base-TX Ethernet interface module (SIC-1FEA) is used for communication
between the router and LAN. It provides the following features:
•
Effective transmission distance of 100 m (328.08 ft) with category-5 twisted pair cables
•
Operating speeds of both 100 Mbps and 10 Mbps and autosensing
•
Both full duplex (in common use) and half-duplex operating modes
Interface specifications
Table 3 Interface specifications
Item
Connector type
Interface type
Number of connectors
Cable type
Operating mode
NOTE:
Ethernet interfaces on network adapters are usually medium dependent interfaces (MDIs). Medium
dependent interface crossover (MDIX) is another type of Ethernet interface, which is usually used on
hubs and LAN switches.
Description
RJ-45
MDI
1
Straight-through Ethernet cable
10/100 Mbps autosensing
Full duplex/half duplex
3
"Ethernet