H3C MSR Router Comware 5 Series Manual page 187

Cable
Customized
rollover cable
(pinouts 4 and
5 are not rolled
over)
Dumb terminal
adapter cable
AUX cable
Dumb terminal
adapter
Connecting a SIC-8AS/SIC-16AS interface module
To connect the SIC-8AS interface module, connect the D60 connector of the 8-port asynchronous
serial port adapter cable to the SIC-8AS interface module.
To connect the SIC-16AS interface module, connect the D28 connector of the 4-port asynchronous
serial port adapter cable to the SIC-16AS interface module, which allows up to four such cables.
Choose the cable connection type according to the remote device type:
•
If the remote device connector is a RJ-45 connector, connect it to the RJ-45 interface of the
asynchronous serial port adapter cable by a straight-through cable. The sequence is shown in
the following figure:
Appearance
1 × RJ-45 < ---- > 1 × RJ-45
1 × RJ-45 (female) < ---- > 1 × RJ-45 (male)
1 × D25 & 1 × D9 < ---- > 1 × RJ-45
1 × D25 < ---- > 1 × RJ-45
178
Applicable
models
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE
MIM-8ASE
MIM-16ASE
FIC-8ASE
FIC-16ASE