Interface LEDs
Figure 170 FIC-1VT1 panel
Table 204 LED description
LED
LINK/ACT
LP/AL
Interface cables and the connection methods
For more information about T1 interface cables and the connection methods, see
Network data encryption module
•
FIC-HNDE
FIC-HNDE
Introduction
The high network data encryption module (FIC-HNDE) delivers IPSec and hardware-based IP
packet encryption. It supports multiple hardware encryption/decryption and hash algorithms, thus
providing encryption with high performance and reliability.
The FIC-HNDE is intended for low-end and mid-range modular routers. Installed with an FIC-HNDE,
the main board of your router can implement VPN with encryption provided by the FIC-HNDE in
addition to IP packet forwarding.
Description
•
On: Carrier signal has been received.
•
Flashing: Data is being received or/and transmitted.
•
Off: No carrier signal has been received.
•
On: The interface is in a loopback.
•
Off: No loopback or alarm is present.
•
Flashing: An alarm indication signal (AIS), loss of frame alignment
(LFA) signal, or remote alarm indication (RAI) signal is present.
150
"T1
interface."
Need help?
Do you have a question about the MSR Router Comware 5 Series and is the answer not in the manual?
Questions and answers