H3C MSR Router Comware 5 Series Manual page 48

Item
Cable type
Rates
Services
Supported wireless band
Interface LEDs
Figure 42 SIC-3G-HSPA panel
Table 55 LED description
LED
WWAN
RSSI
UMTS
HSDPA
Antennas, interface cables, and the connection methods
CAUTION:
The 3G antenna provided with the SIC-3G-HSPA must be installed on the antenna port that has a
MAIN mark.
For more information about antennas, interface cables, and the connection methods for the
SIC-3G-HSPA interface module, see
Installing a SIM module
CAUTION:
Make sure the beveled corner of the SIM module fits into the beveled corner of the SIM socket.
Description
TNC RF: None
RJ-45: AUX cable
•
HSDPA (downlink: 7.2 Mbps)
•
HSUPA (uplink: 5.76 Mbps)
•
UMTS (downlink: 384 Mbps, uplink: 384 Kbps)
•
EDGE (downlink: 236.8 Kbps, uplink: 236.8 Kbps)
•
GPRS (downlink: 85.6 Kbps, uplink: 85.6 Kbps)
GPRS/EDGE/UMTS/HSDPA
850/900/1900/2100 MHz WCDMA/HSDPA/HSUPA
850/900/1800/1900 MHz GPRS/EDGE
Description
•
Steady green: A link is present.
•
Flashing green: Data is being transmitted or received.
•
Steady green: Strong signal.
•
Flashing green: Middle or low signal.
•
Off: Weak signal or no signal.
•
Steady yellow: The service is valid.
•
Off: No service.
•
Steady yellow: The service is valid.
•
Off: No service.
"3G interface."
39