Table 61 LED description
LED
ACT
Connecting the encryption module
IMPORTANT:
For the SIC-CNDE to support the encryption feature, you must install the encryption module on the
SIC-CNDE.
To install the encryption module on the SIC-CNDE:
Slowly push the encryption module into the MINI PCI-E slot of the SIC-CNDE.
1.
Secure the encryption module to the SIC-CNDE by using screws.
2.
Description
•
Flashing: Data is being transmitted or received between the module and the host.
•
Steady green: No data is being transmitted or received.
45