H3C MSR Router Comware 5 Series Manual page 182

Cable
4-port T1
cable
8-port T1
cable
RJ-45
connector
Connecting a 1-port T1 cable
The two ends of the 1-port T1 cable are RJ-45 connectors. Connect one end of the cable to the T1
connector (RJ-45) of the interface module and the other end of the cable to the T1 connector (RJ-45)
on the remote device.
Connecting a 4/8-port T1 cable
•
Connect the D68 connector of the 4/8-port T1 cable to the D68 interface on the interface
module and fasten the bolts to fix the cable.
•
The other end of the cable provides four or eight RJ-45 connectors. Connect them to the RJ-45
interface on the remote device as needed.
Appearance
1 × D68 < ---- > 4 × RJ-45
1 × D68 < ---- > 8 × RJ-45
1 × RJ-45 < ---- > 1 × RJ-45
173
Applicable models
MIM-IMA-4T1
FIC-IMA-4T1
FIC-IMA-8T1
MIM-8T1
MIM-8T1-F
MIM-IMA-8T1
FIC-8T1
FIC-8T1-F
FIC-IMA-8T1
As required