Technical Specifications; Vehicle Identification Number (Vin); Brake System; Wheel And Tire Torque Specifications - Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual

Table of Contents

Advertisement

VEHICLE IDENTIFICATION NUMBER (VIN)

The VIN is found on a label located on the left front
corner of the instrument panel pad, visible from
outside of the vehicle through the windshield.
Windshield VIN Label Location
NOTE:
It is illegal to remove or alter the VIN.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic brake
systems. If either of the two hydraulic systems lose
normal capability, the remaining system will still
function. However, there will be some loss of
overall braking effectiveness. You may notice
increased pedal travel during application, greater
pedal force required to slow or stop, and potential
activation of the Brake Warning Light.
In the event power assist is lost for any reason the
brakes will still function. However, the effort
required to brake the vehicle will be much greater
than that required with the power system
operating.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to the
vehicle. Any time a wheel has been removed and
reinstalled on the vehicle, the lug nuts/bolts
should be torqued using a properly calibrated
torque wrench using a six-sided (hex) deep wall
socket.
T
S
ORQUE
PECIFICATIONS
Lug Nut/Bolt
**Lug Nut/
Torque
Bolt Size
130 ft-lb
M14 x 1.50
(176 N·m)
**Use only authorized dealer recommended lug
nuts/bolts and clean or remove any dirt or oil
before tightening.
403
Lug Nut/Bolt
Socket Size
22 mm
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents