Four-Wheel Drive Operation; Mp1522 Command-Trac Transfer Case - If Equipped - Jeep Liberty 2008 Owner's Manual

304 STARTING AND OPERATING
Gear Selection
Maximum Speed

FOUR-WHEEL DRIVE OPERATION

MP1522 Command-Trac Transfer Case — If
Equipped
Operating Information and Precautions
The Command-Trac transfer case provides four posi-
tions:
• 2–wheel (rear) drive (2WD) High range.
• 4-wheel drive (4WD) High range.
• Neutral.
• 4-wheel drive (4WD) Low range.
This transfer case is intended to be driven in the 2-wheel
drive position (2WD) for normal street and highway
conditions such as dry hard-surfaced roads.
6 to 5 5 to 4 4 to 3 3 to 2 2 to 1
85 mph (135 km/h) 75 mph (120 km/h) 55 mph (88 km/h) 35 mph (56 km/h) 20 mph (32 km/h)
When additional traction is required, select the transfer
case 4WD LOCK position or 4WD LOW position. This
position locks the front driveshaft and rear driveshaft
together and forces the front and rear wheels to rotate at
the same speed.
Use the transfer case NEUTRAL position for recreational
towing only. Refer to "Recreational Towing" in this
section for specific procedures on shifting into and out of
NEUTRAL.