How To Program; The Graphical And Numerical Local Control Panels - Danfoss VLT AutomationDrive FC 302 Programming Manual

How to Program

2 How to Program
2.1 The Graphical and Numerical Local
Control Panels
Easy programming of the frequency converter is performed
by the graphical LCP (LCP 102). Consult the frequency
converter Design Guide, when using the Numeric Local
Control Panel (LCP 101).
The LCP is divided into 4 functional groups:
1. Graphical display with status lines.
2. Menu keys and indicator lights - changing
parameters and switching between display
functions.
3. Navigation keys and indicator lights (LEDs).
4. Operation keys and indicator lights (LEDs).
The LCP display can show up to 5 items of operating data
while displaying Status.
Display lines:
a. Status line: Status messages displaying icons and
graphics.
b. Line 1-2: Operator data lines displaying data
defined or selected by the user. By pressing
[Status], up to 1 extra line can be added.
c. Status line: Status messages displaying text.
NOTICE
If start-up is delayed, the LCP displays the INITIALISING
message until it is ready. Adding or removing options
may delay the start-up.
MG33MJ02
Programming Guide
1
2
On
3
Warn.
Alarm
4
Illustration 2.1 LCP
Danfoss A/S © Rev. 10/2014 All rights reserved.
Status
1234rpm 10,4A 43,5Hz
43,5Hz
Run OK
Quick Main
Status
Menu Menu
OK
Hand Auto
O
on on
2
a
1(0)
b
c
Alarm
Log
Reset
11
2